PartsTable
Technical Data Sheet
Download PDF

10004P0429 — CLAMP,BLOCK

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10004P0429: CLAMP,BLOCK.

The CLAMP,BLOCK is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYPROPYLENE AND STEEL, block_height: 0.95 INCHES MINIMUM AND 0.95 INCHES MINIMUM AND 1.05 INCHES MAXIMUM1.05 INCHES MAXIMUM IN, overall_width: 1.45 INCHES MINIMUM AND 1.45 INCHES MINIMUM AND 1.55 INCHES MAXIMUM1.55 INCHES MAXIMUM IN, overall_height: 2.31 INCHES NOMINAL2.31 INCHES NOMINAL IN, overall_length: 4.22 INCHES MINIMUM AND 4.22 INCHES MINIMUM AND 4.32 INCHES MAXIMUM4.32 INCHES MAXIMUM IN, style_designator: RECTANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-615-5107, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10004P0429
NSN: 5340-01-615-5107
FSC: 5340 — Hardware, Commercial
CAGE: 01365 — MARINE CORPS SYSTEMS COMMAND DIV MARINE CORPS SYSTEMS COMMAND TECHNICAL DATA REPOSITORY CUSTOMER SERVICE (USA)
SPECIFICATIONS
materialPLASTIC POLYPROPYLENE AND STEEL
block_height0.95 INCHES MINIMUM AND 0.95 INCHES MINIMUM AND 1.05 INCHES MAXIMUM1.05 INCHES MAXIMUM IN
overall_width1.45 INCHES MINIMUM AND 1.45 INCHES MINIMUM AND 1.55 INCHES MAXIMUM1.55 INCHES MAXIMUM IN
overall_height2.31 INCHES NOMINAL2.31 INCHES NOMINAL IN
overall_length4.22 INCHES MINIMUM AND 4.22 INCHES MINIMUM AND 4.32 INCHES MAXIMUM4.32 INCHES MAXIMUM IN
style_designatorRECTANGULAR
mounting_facilityUNTHREADED HOLE(S)UNTHREADED HOLE(S)
clamping_hole_diameter0.820 INCHES NOMINAL SECOND HOLE IN
clamping_hole_quantity22
mounting_hole_diameter0.370 INCHES MINIMUM AND 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM0.380 INCHES MAXIMUM IN
mounting_hole_quantity22
end_item_identification2430-01-581-85722430-01-581-8572
NSN5340-01-615-5107
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10004P0429 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 22
•
CLAMPING HOLE QUANTITY: 22
•
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER: 0.940 INCHES MINIMUM AND 0.950 INCHES MAXIMUM IN
•
BLOCK HEIGHT: 0.95 INCHES MINIMUM AND 0.95 INCHES MINIMUM AND 1.05 INCHES MAXIMUM1.05 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: RECTANGULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A36 ASSN STD 2ND MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.370 INCHES MINIMUM AND 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM0.380 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY22
OVERALL HEIGHT2.31 INCHES NOMINAL2.31 INCHES NOMINAL IN
CLAMPING HOLE QUANTITY22
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER0.940 INCHES MINIMUM AND 0.950 INCHES MAXIMUM IN
BLOCK HEIGHT0.95 INCHES MINIMUM AND 0.95 INCHES MINIMUM AND 1.05 INCHES MAXIMUM1.05 INCHES MAXIMUM IN
STYLE DESIGNATORRECTANGULAR
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A36 ASSN STD 2ND MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.370 INCHES MINIMUM AND 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM0.380 INCHES MAXIMUM IN
OVERALL LENGTH4.22 INCHES MINIMUM AND 4.22 INCHES MINIMUM AND 4.32 INCHES MAXIMUM4.32 INCHES MAXIMUM IN
OVERALL WIDTH1.45 INCHES MINIMUM AND 1.45 INCHES MINIMUM AND 1.55 INCHES MAXIMUM1.55 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10004P0429?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10004P0429?
10004P0429 is a CLAMP,BLOCK.
What is the NSN for 10004P0429?
10004P0429 is cataloged in the U.S. Government catalog under NSN 5340-01-615-5107. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10004P0429

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.