PartsTable
Technical Data Sheet
Download PDF

100045-2 — DAMPENER,FLUID PRESSURE

✓ Government record, cited
3M · BOLT SCREW
PRODUCT OVERVIEW

100045-2: DAMPENER,FLUID PRESSURE.

The DAMPENER,FLUID PRESSURE is a 3M industrial component. Key specifications include material: STEEL CORROSION RESISTING, overall_width: 1.750 INCHES NOMINAL IN, overall_length: 12.190 INCHES NOMINAL IN, end_item_identification: PU-820 T/ GENERATOR SET DIESEL ENGINE, part_name_assigned_by_controlling_agency: BRACE,LATERAL,RADIATOR. This part is cataloged in the U.S.

Government catalog under NSN 5325-00-191-4986, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
100045-2
NSN: 5325-00-191-4986
NIINs: 001914986, 015338247, 015570457
FSC: 5325 — Fastening Devices
CAGE: 52764 — VERCO INDUSTRIES (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
overall_width1.750 INCHES NOMINAL IN
overall_length12.190 INCHES NOMINAL IN
special_featuresITEM HAS (1) MOUNTING HOLE 0.688 THRU: (1) SLOT 0.563 X 0875 OPPOSITE ENDS: BEND RADIUS 0.180 (TYP): END W/ MOUNTING HOLE CHAMFRED ENDS 1/4 X 1/4; SIDE (2) CHAMFERED 1/2 X 1/2
end_item_identificationPU-820 T/ GENERATOR SET DIESEL ENGINE
part_name_assigned_by_controlling_agencyBRACE,LATERAL,RADIATOR
NSN5325-00-191-4986
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 100045-2 · 3M ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
GROMMET STYLE: ROUND
•
FLANGE THICKNESS: 0.125 INCHES NOMINAL IN
•
LARGE FLANGE OUTSIDE DIAMETER: 3.040 INCHES NOMINAL IN
•
GROOVE OUTSIDE DIAMETER: 2.680 INCHES NOMINAL IN
•
GROMMET CONSTRUCTION TYPE: SOLID
•
MATERIAL: RUBBER OVERALL
•
GROOVE WIDTH: 0.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.375 INCHES NOMINAL IN
GROMMET STYLEROUND
FLANGE THICKNESS0.125 INCHES NOMINAL IN
LARGE FLANGE OUTSIDE DIAMETER3.040 INCHES NOMINAL IN
GROOVE OUTSIDE DIAMETER2.680 INCHES NOMINAL IN
GROMMET CONSTRUCTION TYPESOLID
MATERIALRUBBER OVERALL
GROOVE WIDTH0.125 INCHES NOMINAL IN
NONMETALLIC HARDNESS RATING80.0 NOMINAL SHORE DUROMETER A
HOLE DIAMETER2.500 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
100045Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 100045-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 100045-2?
100045-2 is a DAMPENER,FLUID PRESSURE manufactured by 3M.
What parts can replace 100045-2?
There is 1 known substitute for 100045-2: 100045. Substitute compatibility should be verified for your specific system.
What is the NSN for 100045-2?
100045-2 is cataloged in the U.S. Government catalog under NSN 5325-00-191-4986. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 100045-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.