PartsTable
Technical Data Sheet
Download PDF

10004-129 — PLUG,VENT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10004-129: PLUG,VENT.

The PLUG,VENT is a the manufacturer industrial component. Key specifications include length: 0.220 INCHES NOMINAL IN, material: COPPER ALLOY, inside_diameter: 0.030 INCHES NOMINAL IN, vent_hole_shape: ROUND, outside_diameter: 0.500 INCHES NOMINAL IN, vent_hole_diameter: 0.030 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-123-3345, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10004-129
NSN: 5340-01-123-3345
FSC: 5340 — Hardware, Commercial
CAGE: 32908 — MALWIN ELECTRONICS CORP. (USA)
SPECIFICATIONS
length0.220 INCHES NOMINAL IN
materialCOPPER ALLOY
inside_diameter0.030 INCHES NOMINAL IN
vent_hole_shapeROUND
outside_diameter0.500 INCHES NOMINAL IN
vent_hole_diameter0.030 INCHES NOMINAL IN
vent_hole_quantity1
end_connection_typeUNTHREADED
NSN5340-01-123-3345
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10004-129 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
VENT HOLE DIAMETER: 0.030 INCHES NOMINAL IN
•
LENGTH: 0.220 INCHES NOMINAL IN
•
VENT HOLE SHAPE: ROUND
•
END CONNECTION TYPE: UNTHREADED
•
OUTSIDE DIAMETER: 0.500 INCHES NOMINAL IN
•
INSIDE DIAMETER: 0.030 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY
•
VENT HOLE QUANTITY: 1
TECHNICAL CHARACTERISTICS
VENT HOLE DIAMETER0.030 INCHES NOMINAL IN
LENGTH0.220 INCHES NOMINAL IN
VENT HOLE SHAPEROUND
END CONNECTION TYPEUNTHREADED
OUTSIDE DIAMETER0.500 INCHES NOMINAL IN
INSIDE DIAMETER0.030 INCHES NOMINAL IN
MATERIALCOPPER ALLOY
VENT HOLE QUANTITY1
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10004-129?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10004-129?
10004-129 is a PLUG,VENT.
What is the NSN for 10004-129?
10004-129 is cataloged in the U.S. Government catalog under NSN 5340-01-123-3345. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10004-129

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.