PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 100032-G7787
100032-G7787 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.156 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, outside_diameter: 5.500 INCHES NOMINAL IN, fsc_application_data: FUSELAGES,AIRFRAME. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-656-3019, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
100032-G7787
NSN: 5330-00-656-3019
FSC: 5330
CAGE: 75345 — KIRKHILL, INC. DBA KIRKHILL INC (USA)
SPECIFICATIONS
hole_diameter0.156 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
outside_diameter5.500 INCHES NOMINAL IN
fsc_application_dataFUSELAGES,AIRFRAME
NSN5330-00-656-3019
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 100032-G7787 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 5.500 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.156 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
FSC APPLICATION DATA: FUSELAGES,AIRFRAME
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER5.500 INCHES NOMINAL IN
HOLE DIAMETER0.156 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
FSC APPLICATION DATAFUSELAGES,AIRFRAME
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
F1Interchangeable
interchangeable cross-reference
interchangeable
224664-001Interchangeable
interchangeable cross-reference
interchangeable
R27710Interchangeable
interchangeable cross-reference
interchangeable
10-003-2Interchangeable
interchangeable cross-reference
interchangeable
12Interchangeable
interchangeable cross-reference
interchangeable
124Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 100032-G7787?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 100032-G7787?
100032-G7787 is a GASKET.
What parts can replace 100032-G7787?
There are 13 known substitutes for 100032-G7787: F1, 224664-001, R27710 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 100032-G7787?
100032-G7787 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-656-3019. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 100032-G7787

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026