PartsTable
Technical Data Sheet
Download PDF

100008-3 — WELDING POWDER,METALLIC OVERLAY

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

100008-3: WELDING POWDER,METALLIC OVERLAY.

WELDING POWDER,METALLIC OVERLAY. Key specifications include material: STEEL OVERALL, overall_length: 3.000 INCHES NOMINAL IN, special_features: SELF-LOCKING SERRATED TIPS; SIZE 60-652; COTTON DRESSING, part_name_assigned_by_controlling_agency: FORCEPS DRESSING CRS 3IN LG SELF LOCKING SERRATED TIPS SZ60-652 IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-213-9281, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 100008-3
NSN: 5310-00-213-9281
NIINs: 002139281, 008835321, 010868754, 011308826, 013356104
FSC: 5310 — Nuts and Washers
CAGE: 32274 — CIPHER DATA PRODUCTS INC OEM MARKETING DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
overall_length3.000 INCHES NOMINAL IN
special_featuresSELF-LOCKING SERRATED TIPS; SIZE 60-652; COTTON DRESSING
part_name_assigned_by_controlling_agencyFORCEPS DRESSING CRS 3IN LG SELF LOCKING SERRATED TIPS SZ60-652 IN
NSN5310-00-213-9281
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 100008-3 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TOP RECESS DIAMETER: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
•
BOTTOM RECESS DIAMETER: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
•
TOP RECESS ANGLE: 45.0 DEGREES NOMINAL
•
STYLE DESIGNATOR: RECESSED BOTH SIDES
•
MATERIAL DOCUMENT AND CLASSIFICATION: FED STD 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
•
BOTTOM RECESS ANGLE: 45.0 DEGREES NOMINAL
TECHNICAL CHARACTERISTICS
TOP RECESS DIAMETER0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
BOTTOM RECESS DIAMETER0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
TOP RECESS ANGLE45.0 DEGREES NOMINAL
STYLE DESIGNATORRECESSED BOTH SIDES
MATERIAL DOCUMENT AND CLASSIFICATIONFED STD 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
MATERIAL THICKNESS0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
BOTTOM RECESS ANGLE45.0 DEGREES NOMINAL
SURFACE TREATMENTCHROMIUM OVERALL
MATERIALSTEEL COMP 303 OVERALL
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 100008-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 100008-3?
100008-3 is a WELDING POWDER,METALLIC OVERLAY. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 100008-3?
100008-3 is cataloged in the U.S. Government catalog under NSN 5310-00-213-9281. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 100008-3

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.