PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1000-3400
1000-3400 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: STEEL COMP 304 OVERALL, head_style: FLAT CHAMFER, head_height: 0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN, thread_length: 0.375 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-432-4557, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1000-3400
NSN: 5330-00-432-4557
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL COMP 304 OVERALL
head_styleFLAT CHAMFER
head_height0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
thread_length0.375 INCHES MAXIMUM IN
fastener_length0.375 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_across_flats0.109 INCHES MINIMUM AND 0.111 INCHES MAXIMUM IN
internal_drive_styleHEXAGON
minimum_yield_strength30000 POUNDS PER SQUARE INCH LBS
NSN5330-00-432-4557
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1000-3400 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.188 INCHES NOMINAL IN
•
HARDNESS RATING: 65.0 SHORE DUROMETER A MINIMUM AND 70.0 SHORE DUROMETER A MAXIMUM OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
•
PERIPHERAL DIAMETER: 0.422 INCHES MINIMUM AND 0.425 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.227 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.188 INCHES NOMINAL IN
HARDNESS RATING65.0 SHORE DUROMETER A MINIMUM AND 70.0 SHORE DUROMETER A MAXIMUM OVERALL
CROSS-SECTIONAL SHAPE STYLESPECIAL
PERIPHERAL DIAMETER0.422 INCHES MINIMUM AND 0.425 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.227 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
B107.400 CAT 53Interchangeable
interchangeable cross-reference
interchangeable
B107.53Interchangeable
interchangeable cross-reference
interchangeable
04 52033Interchangeable
interchangeable cross-reference
interchangeable
136CInterchangeable
interchangeable cross-reference
interchangeable
MS16995-17Interchangeable
interchangeable cross-reference
interchangeable
10003400Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1000-3400?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1000-3400?
1000-3400 is a PACKING,PREFORMED.
What parts can replace 1000-3400?
There are 11 known substitutes for 1000-3400: B107.400 CAT 53, B107.53, 04 52033 and 8 more. Substitute compatibility should be verified for your specific system.
Is 1000-3400 still available?
1000-3400 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1000-3400

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026