PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1000-1412-003
1000-1412-003 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.149 INCHES NOMINAL IN, overall_width: 0.750 INCHES NOMINAL IN, special_features: THREE MOUNTING SUPPORTS ATTACHED TO OUTSIDE DIA, material_thickness: 0.035 INCHES NOMINAL IN, loop_inside_diameter: 2.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-118-2846, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1000-1412-003
NSN: 5340-01-118-2846
FSC: 5340
CAGE: 15280 — NORTHROP GRUMMAN SYSTEMS CORPORATION DIV ES DEFENSIVE SYSTEMS DIVISION (USA)
SPECIFICATIONS
diameter0.149 INCHES NOMINAL IN
overall_width0.750 INCHES NOMINAL IN
special_featuresTHREE MOUNTING SUPPORTS ATTACHED TO OUTSIDE DIA
material_thickness0.035 INCHES NOMINAL IN
loop_inside_diameter2.500 INCHES NOMINAL IN
NSN5340-01-118-2846
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1000-1412-003 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOOP INSIDE DIAMETER: 2.500 INCHES NOMINAL IN
•
DIAMETER: 0.149 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.035 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESTHREE MOUNTING SUPPORTS ATTACHED TO OUTSIDE DIA
LOOP INSIDE DIAMETER2.500 INCHES NOMINAL IN
OVERALL WIDTH0.750 INCHES NOMINAL IN
DIAMETER0.149 INCHES NOMINAL IN
MATERIAL THICKNESS0.035 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 1
34775Interchangeable
px4-300r
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1000-1412-003?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1000-1412-003?
1000-1412-003 is a CLAMP,LOOP.
What parts can replace 1000-1412-003?
There is 1 known substitute for 1000-1412-003: 34775. Substitute compatibility should be verified for your specific system.
What is the NSN for 1000-1412-003?
1000-1412-003 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-118-2846. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1000-1412-003

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026