PartsTable
Technical Data Sheet
Download PDF

1000-0030-127 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1000-0030-127: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, temp_rating: -20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, peripheral_diameter: 1.630 INCHES NOMINAL IN, center_hole_diameter: 1.412 INCHES MINIMUM AND 1.436 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-314-7237, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1000-0030-127
NSN: 5331-01-314-7237
FSC: 5331 — O-ring
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
temp_rating-20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
hardness_rating75.0 SHORE DUROMETER A NOMINAL
peripheral_diameter1.630 INCHES NOMINAL IN
center_hole_diameter1.412 INCHES MINIMUM AND 1.436 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
departure_from_cited_documentCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
criticality_code_justificationZZZW
NSN5331-01-314-7237
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1000-0030-127 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
CRITICALITY CODE JUSTIFICATION: ZZZW
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
DEPARTURE FROM CITED DOCUMENT: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
•
PERIPHERAL DIAMETER: 1.630 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 1.412 INCHES MINIMUM AND 1.436 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
TEMP RATING-20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
CRITICALITY CODE JUSTIFICATIONZZZW
ELONGATION PERCENTAGE125 MAXIMUM
DEPARTURE FROM CITED DOCUMENTCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
PERIPHERAL DIAMETER1.630 INCHES NOMINAL IN
CENTER HOLE DIAMETER1.412 INCHES MINIMUM AND 1.436 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
SUBSTITUTES & CROSS-REFERENCES 6
V3D10042 ITEM 14Reference document
Same NSN cross-reference
Reference document — Secondary reference
M83248/1-127CPReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
AS3209-127 CPSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
L180-127Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
V3D10042 ITEM 14CPSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
M83248/1-127Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 1000-0030-127?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1000-0030-127?
1000-0030-127 is a O-RING.
What parts can replace 1000-0030-127?
There are 6 known substitutes for 1000-0030-127: V3D10042 ITEM 14, M83248/1-127CP, AS3209-127 CP and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1000-0030-127?
1000-0030-127 is cataloged in the U.S. Government catalog under NSN 5331-01-314-7237. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1000-0030-127

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.