PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 100-884
100-884 ✓ Verified by PartsTable
Hama · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The COIL,RADIO FREQUENCY is a Hama industrial component. Key specifications include length: 0.789 INCHES MINIMUM AND 0.791 INCHES MAXIMUM IN, material: PLASTIC, body_width: 0.100 INCHES NOMINAL IN, seat_angle: 45.0 DEGREES NOMINAL, body_height: 0.260 INCHES MAXIMUM IN, body_length: 0.200 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-043-3257, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
100-884
NSN: 5340-00-043-3257
FSC: 5340
CAGE: 10138 — ASTRONAUTICS CORPORATION OF AMERICA (USA)
SPECIFICATIONS
length0.789 INCHES MINIMUM AND 0.791 INCHES MAXIMUM IN
materialPLASTIC
body_width0.100 INCHES NOMINAL IN
seat_angle45.0 DEGREES NOMINAL
body_height0.260 INCHES MAXIMUM IN
body_length0.200 INCHES NOMINAL IN
tip_diameter0.244 INCHES MINIMUM AND 0.246 INCHES MAXIMUM IN
rating_methodELECTRICAL SINGLE COMPONENT SINGLE WINDING
coil_form_typeSOLID SINGLE COMPONENT
inclosure_typeFULLY INCLOSED
overall_height0.362 INCHES MINIMUM AND 0.372 INCHES MAXIMUM IN
quality_factor80 MINIMUM SINGLE COMPONENT SINGLE WINDING
NSN5340-00-043-3257
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 100-884 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM END TO HOLE CENTER: 0.250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: LEFT INTERNAL AND RIGHT INTERNAL THREADS
•
HOLE QUANTITY PERPENDICULAR TO AXIS: 1
•
LENGTH: 0.789 INCHES MINIMUM AND 0.791 INCHES MAXIMUM IN
•
WIDTH ACROSS FLATS: 0.187 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE: HEXAGON
TECHNICAL CHARACTERISTICS (FLIS)
DISTANCE FROM END TO HOLE CENTER0.250 INCHES NOMINAL IN
STYLE DESIGNATORLEFT INTERNAL AND RIGHT INTERNAL THREADS
HOLE QUANTITY PERPENDICULAR TO AXIS1
LENGTH0.789 INCHES MINIMUM AND 0.791 INCHES MAXIMUM IN
WIDTH ACROSS FLATS0.187 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPEHEXAGON
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
100-884Interchangeable
interchangeable cross-reference
interchangeable
17169Interchangeable
interchangeable cross-reference
interchangeable
989108-50BInterchangeable
interchangeable cross-reference
interchangeable
700527 PIECE 14Interchangeable
interchangeable cross-reference
interchangeable
8212750Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 100-884?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 100-884?
100-884 is a COIL,RADIO FREQUENCY manufactured by Hama.
What parts can replace 100-884?
There are 5 known substitutes for 100-884: 100-884, 17169, 989108-50B and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 100-884?
100-884 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-043-3257. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 100-884

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026