Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The ADAPTER,STRAIGHT,PIPE TO TUBE is a the manufacturer industrial component. Key specifications include length: 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT, material: STEEL COMP 1118 OVERALL, body_style: W/O MTG FACILITIES, RADIAL TERMINALS, body_width: 0.300 INCHES NOMINAL IN, head_style: FLAT CHAMFER, point_type: CONVENTIONAL. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-149-0063, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MRO→MRO_GENERAL→100-84
NSN:5330-00-149-0063 FSC:5330 CAGE:22593 — FITZGERALD GASKET A CO OF TANNETICS INC (USA)
SPECIFICATIONS
length
10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT
material
STEEL COMP 1118 OVERALL
body_style
W/O MTG FACILITIES, RADIAL TERMINALS
body_width
0.300 INCHES NOMINAL IN
head_style
FLAT CHAMFER
point_type
CONVENTIONAL
body_height
0.104 INCHES MAXIMUM IN
body_length
0.808 INCHES MAXIMUM IN
design_type
4 FLUTE
head_height
0.156 INCHES NOMINAL IN
point_angle
118.0 DEGREES NOMINAL
shank_style
STANDARD TAPER W/TANG
NSN
5330-00-149-0063
COMPONENT DIAGRAM
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 0.875 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
MATERIAL: PAPER OVERALL
•
HOLE DIAMETER: 0.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
SIDE RADIUS FROM GASKET CENTER: 0.750 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
BOLT CIRCLE DIAMETER: 2.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLE
SOLID SINGLE OR COMPOSITION
APERTURE DIAMETER
0.875 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS
0.062 INCHES NOMINAL IN
MATERIAL
PAPER OVERALL
HOLE DIAMETER
0.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 100-84?
100-84 is a ADAPTER,STRAIGHT,PIPE TO TUBE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 100-84?
There are 18 known substitutes for 100-84: 10084, GGG-E-936, GGG-E-936 TY2SZ8 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 100-84?
100-84 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-149-0063. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.