PartsTable
Technical Data Sheet
PartsTable / MRO / 100-8-4
100-8-4 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The ADAPTER,STRAIGHT,PIPE TO TUBE is a the manufacturer industrial component. Key specifications include length: 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT, material: STEEL COMP 1118 OVERALL, body_style: W/O MTG FACILITIES, RADIAL TERMINALS, body_width: 0.300 INCHES NOMINAL IN, head_style: FLAT CHAMFER, point_type: CONVENTIONAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-149-0063, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 100-8-4
NSN: 5330-00-149-0063
FSC: 5330
CAGE: 22593 — FITZGERALD GASKET A CO OF TANNETICS INC (USA)
SPECIFICATIONS
length10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT
materialSTEEL COMP 1118 OVERALL
body_styleW/O MTG FACILITIES, RADIAL TERMINALS
body_width0.300 INCHES NOMINAL IN
head_styleFLAT CHAMFER
point_typeCONVENTIONAL
body_height0.104 INCHES MAXIMUM IN
body_length0.808 INCHES MAXIMUM IN
design_type4 FLUTE
head_height0.156 INCHES NOMINAL IN
point_angle118.0 DEGREES NOMINAL
shank_styleSTANDARD TAPER W/TANG
NSN5330-00-149-0063
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 100-8-4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 0.875 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
MATERIAL: PAPER OVERALL
•
HOLE DIAMETER: 0.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
SIDE RADIUS FROM GASKET CENTER: 0.750 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
BOLT CIRCLE DIAMETER: 2.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
APERTURE DIAMETER0.875 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
MATERIALPAPER OVERALL
HOLE DIAMETER0.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SIDE RADIUS FROM GASKET CENTER0.750 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
BOLT CIRCLE DIAMETER2.750 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.438 INCHES NOMINAL IN
BOLT HOLE QUANTITY2
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
10084Interchangeable
interchangeable cross-reference
interchangeable
GGG-E-936Interchangeable
interchangeable cross-reference
interchangeable
GGG-E-936 TY2SZ8Interchangeable
interchangeable cross-reference
interchangeable
125330Interchangeable
interchangeable cross-reference
interchangeable
110 1-5/16Interchangeable
interchangeable cross-reference
interchangeable
209Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 100-8-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 100-8-4?
100-8-4 is a ADAPTER,STRAIGHT,PIPE TO TUBE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 100-8-4?
There are 18 known substitutes for 100-8-4: 10084, GGG-E-936, GGG-E-936 TY2SZ8 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 100-8-4?
100-8-4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-149-0063. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 100-8-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026