PartsTable
Technical Data Sheet
Download PDF

100-7S4-5 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

100-7S4-5: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FILLISTER, head_height: 0.060 INCHES NOMINAL IN, thread_class: 2A A, head_diameter: 0.229 INCHES NOMINAL IN, thread_length: 0.313 INCHES NOMINAL IN, screw_material: STEEL COMP 1010. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-085-0617, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
100-7S4-5
NSN: 5305-00-085-0617
FSC: 5305 — Screws
CAGE: D8385 — THALES DEUTSCHLAND GMBH DIV CUSTOMER SERVICES (DEU)
SPECIFICATIONS
head_styleFILLISTER
head_height0.060 INCHES NOMINAL IN
thread_class2A A
head_diameter0.229 INCHES NOMINAL IN
thread_length0.313 INCHES NOMINAL IN
screw_materialSTEEL COMP 1010
fastener_length0.313 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.112 INCHES IN
minimum_tensile_strength55000 POUNDS PER SQUARE INCH LBS
thread_quantity_per_inch40
NSN5305-00-085-0617
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 100-7S4-5 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.060 INCHES NOMINAL IN
•
FASTENER LENGTH: 0.313 INCHES NOMINAL IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.313 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.112 INCHES IN
•
HEAD STYLE: FILLISTER
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL COMP 1010
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.060 INCHES NOMINAL IN
FASTENER LENGTH0.313 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONASTM A108 ASSN STD SINGLE MATERIAL RESPONSE
THREAD LENGTH0.313 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.112 INCHES IN
HEAD STYLEFILLISTER
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL COMP 1010
MINIMUM TENSILE STRENGTH55000 POUNDS PER SQUARE INCH LBS
INTERNAL DRIVE STYLESLOT
SUBSTITUTES & CROSS-REFERENCES 2
20602-23058Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
104418Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 100-7S4-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 100-7S4-5?
100-7S4-5 is a SCREW,MACHINE.
What parts can replace 100-7S4-5?
There are 2 known substitutes for 100-7S4-5: 20602-23058, 104418. Substitute compatibility should be verified for your specific system.
What is the NSN for 100-7S4-5?
100-7S4-5 is cataloged in the U.S. Government catalog under NSN 5305-00-085-0617. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 100-7S4-5