PartsTable
Technical Data Sheet
Download PDF

100-5B3-6 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

100-5B3-6: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT CHAMFER, head_height: 0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM IN, thread_length: 0.375 INCHES MINIMUM IN, screw_material: COPPER ALLOY. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-982-7339, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
100-5B3-6
NSN: 5305-00-982-7339
FSC: 5305 — Screws
CAGE: D8385 — THALES DEUTSCHLAND GMBH DIV CUSTOMER SERVICES (DEU)
SPECIFICATIONS
head_styleFLAT CHAMFER
head_height0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM IN
thread_length0.375 INCHES MINIMUM IN
screw_materialCOPPER ALLOY
fastener_length0.375 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.099 INCHES IN
screw_surface_treatmentNICKEL
thread_quantity_per_inch48
NSN5305-00-982-7339
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 100-5B3-6 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: NICKEL
•
FASTENER LENGTH: 0.375 INCHES NOMINAL IN
•
THREAD LENGTH: 0.375 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.099 INCHES IN
•
HEAD STYLE: FLAT CHAMFER
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: COPPER ALLOY
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTNICKEL
FASTENER LENGTH0.375 INCHES NOMINAL IN
THREAD LENGTH0.375 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.099 INCHES IN
HEAD STYLEFLAT CHAMFER
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALCOPPER ALLOY
INTERNAL DRIVE STYLESLOT
THREAD CLASS2A A
SUBSTITUTES & CROSS-REFERENCES 1
104134Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 100-5B3-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 100-5B3-6?
100-5B3-6 is a SCREW,MACHINE.
What parts can replace 100-5B3-6?
There is 1 known substitute for 100-5B3-6: 104134. Substitute compatibility should be verified for your specific system.
What is the NSN for 100-5B3-6?
100-5B3-6 is cataloged in the U.S. Government catalog under NSN 5305-00-982-7339. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 100-5B3-6

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.