PartsTable
Technical Data Sheet
Download PDF

100-5483 — RESISTOR,VARIABLE,WIRE WOUND,PRE

✓ Government record, cited
3M · MRO · MRO_GENERAL
PRODUCT OVERVIEW

100-5483: RESISTOR,VARIABLE,WIRE WOUND,PRE.

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include body_style: CYLINDRICAL SERVO MOUNTED, body_length: 2.498 INCHES NOMINAL IN, shaft_style: ROUND, bearing_type: BALL SHAFT, pilot_length: 0.0620 INCHES NOMINAL IN, shaft_length: 0.183 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-975-0998, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 100-5483
NSN: 5905-00-975-0998
FSC: 5905 — Resistor
CAGE: C7407 — IV-ELECTRONIC KLAUS VESPERMANN KG (DEU)
SPECIFICATIONS
body_styleCYLINDRICAL SERVO MOUNTED
body_length2.498 INCHES NOMINAL IN
shaft_styleROUND
bearing_typeBALL SHAFT
pilot_length0.0620 INCHES NOMINAL IN
shaft_length0.183 INCHES NOMINAL IN
shaft_runout0.002 INCHES IN
actuator_typeSINGLE SHAFT
body_diameter1.312 INCHES NOMINAL IN
lateral_runout0.002 INCHES IN
overall_length2.681 INCHES NOMINAL IN
pilot_diameter1.1875 INCHES NOMINAL IN
NSN5905-00-975-0998
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR MFR: 3M RESISTOR,VARIABLE,WIRE WOUND,PRE TITLE COMPONENT PN 100-5483 MFR 3M RESISTOR,VARIABLE,WIRE
KEY FEATURES
•
MAXIMUM RUNNING TORQUE: 0.30 INCH-OUNCES IN
•
BODY DIAMETER: 1.312 INCHES NOMINAL IN
•
LATERAL RUNOUT: 0.002 INCHES IN
•
ELECTRICAL RESISTANCE PER SECTION: 10.0 KILOHMS 1ST SECTION AND 15.0 KILOHMS 2ND SECTION AND 2.0 KILOHMS 4TH SECTION
•
MOUNTING LIP DEPTH: 0.0620 INCHES NOMINAL IN
•
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 105.0 ALL SECTIONS
•
UNDERCUT WIDTH: 0.0730 INCHES NOMINAL IN
•
SECTION QUANTITY: 4
TECHNICAL CHARACTERISTICS
MAXIMUM RUNNING TORQUE0.30 INCH-OUNCES IN
BODY DIAMETER1.312 INCHES NOMINAL IN
LATERAL RUNOUT0.002 INCHES IN
ELECTRICAL RESISTANCE PER SECTION10.0 KILOHMS 1ST SECTION AND 15.0 KILOHMS 2ND SECTION AND 2.0 KILOHMS 4TH SECTION
MOUNTING LIP DEPTH0.0620 INCHES NOMINAL IN
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER105.0 ALL SECTIONS
UNDERCUT WIDTH0.0730 INCHES NOMINAL IN
SECTION QUANTITY4
SHAFT DIAMETER0.250 INCHES NOMINAL IN
UNDERCUT DIAMETER1.187 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
536913Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 100-5483?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 100-5483?
100-5483 is a RESISTOR,VARIABLE,WIRE WOUND,PRE manufactured by 3M. It is classified as a MRO (MRO_GENERAL).
What parts can replace 100-5483?
There is 1 known substitute for 100-5483: 536913. Substitute compatibility should be verified for your specific system.
What is the NSN for 100-5483?
100-5483 is cataloged in the U.S. Government catalog under NSN 5905-00-975-0998. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 100-5483