PartsTable
Technical Data Sheet
PartsTable / MRO / 100-34-0
100-34-0 ✓ Verified by PartsTable
Corolle · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include length: 340.0 MILLIMETERS NOMINAL MM, material: STEEL COMP 303SE OR STEEL COMP 303 OVERALL, thickness: 0.062 INCHES NOMINAL IN, body_style: CYLINDRICAL BUSHING MOUNTED, head_style: PAN, body_length: 0.625 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-205-8341, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 100-34-0
NSN: 5310-00-205-8341
FSC: 5310
CAGE: 30760 — INGERSOLL RAND CO (USA)
SPECIFICATIONS
length340.0 MILLIMETERS NOMINAL MM
materialSTEEL COMP 303SE OR STEEL COMP 303 OVERALL
thickness0.062 INCHES NOMINAL IN
body_styleCYLINDRICAL BUSHING MOUNTED
head_stylePAN
body_length0.625 INCHES NOMINAL IN
head_height0.058 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
shaft_styleROUND, SLOTTED
shank_styleSTRAIGHT
shaft_length0.250 INCHES NOMINAL IN
thread_class3A A
actuator_typeSINGLE SHAFT
NSN5310-00-205-8341
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 100-34-0 · Corolle ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: COPPER OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
OVERALL DIAMETER: 1.469 INCHES NOMINAL IN
•
THICKNESS: 0.062 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.875 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
PERIPHERAL SHAPE STYLEROUND
MATERIALCOPPER OVERALL
CENTER HOLE SHAPE STYLEROUND
OVERALL DIAMETER1.469 INCHES NOMINAL IN
THICKNESS0.062 INCHES NOMINAL IN
HOLE DIAMETER0.875 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
100340Interchangeable
interchangeable cross-reference
interchangeable
SPEC3522-2Interchangeable
interchangeable cross-reference
interchangeable
780693Interchangeable
interchangeable cross-reference
interchangeable
590012Interchangeable
interchangeable cross-reference
interchangeable
24630Interchangeable
interchangeable cross-reference
interchangeable
6515NCM116702Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 100-34-0?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 100-34-0?
100-34-0 is a RESISTOR,VARIABLE,WIRE WOUND,NON manufactured by Corolle. It is classified as a MRO (MRO_GENERAL).
What parts can replace 100-34-0?
There are 8 known substitutes for 100-34-0: 100340, SPEC3522-2, 780693 and 5 more. Substitute compatibility should be verified for your specific system.
Is 100-34-0 still available?
100-34-0 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 100-34-0

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026