PartsTable
Technical Data Sheet
Download PDF

100-223-2 — CHASSIS,ELECTRICAL-ELECTRONIC EQ

✓ Government record, cited
3M · ORING SEAL
PRODUCT OVERVIEW

100-223-2: CHASSIS,ELECTRICAL-ELECTRONIC EQ.

CHASSIS,ELECTRICAL-ELECTRONIC EQ. Key specifications include width: 0.375 INCHES NOMINAL IN, length: 0.531 INCHES NOMINAL IN, material: STEEL COMP 1065 OVERALL, hole_diameter: 0.098 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN, overall_height: 0.609 INCHES NOMINAL IN, special_features: DISTANCE. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-988-1077, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
100-223-2
NSN: 5340-00-988-1077
NIINs: 009881077, 015340737, 015913606
FSC: 5340 — Hardware, Commercial
CAGE: 99378 — ATLEE OF DELAWARE, INCORPORATED (USA)
SPECIFICATIONS
width0.375 INCHES NOMINAL IN
length0.531 INCHES NOMINAL IN
materialSTEEL COMP 1065 OVERALL
hole_diameter0.098 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
overall_height0.609 INCHES NOMINAL IN
special_featuresDISTANCE
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.016 INCHES NOMINAL IN
loop/holding_dimension0.500 INCHES NOMINAL IN
end_item_identificationMASTIFF MINE RESISTANT AMBUSH PROTECTED VEHICLE; WHEEL HUB ASSY
distance_from_loop_center_to_end0.370 INCHES NOMINAL IN
material_document_and_classificationAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5340-00-988-1077
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 100-223-2 MFR: 3M ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.531 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
LOOP/HOLDING DIMENSION: 0.500 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.016 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO END: 0.370 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
WIDTH: 0.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.609 INCHES NOMINAL IN
LENGTH0.531 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
LOOP/HOLDING DIMENSION0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.016 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO END0.370 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
WIDTH0.375 INCHES NOMINAL IN
MATERIALSTEEL COMP 1065 OVERALL
HOLE DIAMETER0.098 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 100-223-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 100-223-2?
100-223-2 is a CHASSIS,ELECTRICAL-ELECTRONIC EQ manufactured by 3M.
What is the NSN for 100-223-2?
100-223-2 is cataloged in the U.S. Government catalog under NSN 5340-00-988-1077. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 100-223-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.