PartsTable
Technical Data Sheet
Download PDF

100-200-7-5D — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

100-200-7-5D: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.430 INCHES NOMINAL IN, length: 0.750 INCHES NOMINAL IN, material: STEEL COMP 1065 OR STEEL OVERALL, hole_diameter: 0.095 INCHES MINIMUM AND 0.101 INCHES MAXIMUM IN, overall_height: 0.490 INCHES NOMINAL IN, mounting_method: UNTHREADED HOLE(S). This part is cataloged in the U.S.

Government catalog under NSN 5340-01-024-5312, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
100-200-7-5D
NSN: 5340-01-024-5312
FSC: 5340 — Hardware, Commercial
CAGE: 99378 — ATLEE OF DELAWARE, INCORPORATED (USA)
SPECIFICATIONS
width0.430 INCHES NOMINAL IN
length0.750 INCHES NOMINAL IN
materialSTEEL COMP 1065 OR STEEL OVERALL
hole_diameter0.095 INCHES MINIMUM AND 0.101 INCHES MAXIMUM IN
overall_height0.490 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S)
special_featuresAPPLY INSULATION FILM OVER CADMIUM PLATE
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.010 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
loop/holding_dimension0.400 INCHES NOMINAL IN
distance_from_loop_center_to_end0.280 INCHES NOMINAL IN
material_document_and_classificationASTM A682 ASSN STD ALL MATERIAL RESPONSES OR ASTM A684 ASSN STD ALL MATERIAL RESPONSES OVERALL
NSN5340-01-024-5312
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 100-200-7-5D MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.750 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A682 ASSN STD ALL MATERIAL RESPONSES OR ASTM A684 ASSN STD ALL MATERIAL RESPONSES OVERALL
•
LOOP/HOLDING DIMENSION: 0.400 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.010 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO END: 0.280 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.490 INCHES NOMINAL IN
LENGTH0.750 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MOUNTING METHODUNTHREADED HOLE(S)
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A682 ASSN STD ALL MATERIAL RESPONSES OR ASTM A684 ASSN STD ALL MATERIAL RESPONSES OVERALL
LOOP/HOLDING DIMENSION0.400 INCHES NOMINAL IN
MATERIAL THICKNESS0.010 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO END0.280 INCHES NOMINAL IN
SPECIAL FEATURESAPPLY INSULATION FILM OVER CADMIUM PLATE
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
950395-81Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
6002-42A/DUReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 100-200-7-5D?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 100-200-7-5D?
100-200-7-5D is a CLIP,SPRING TENSION.
What parts can replace 100-200-7-5D?
There are 2 known substitutes for 100-200-7-5D: 950395-81, 6002-42A/DU. Substitute compatibility should be verified for your specific system.
What is the NSN for 100-200-7-5D?
100-200-7-5D is cataloged in the U.S. Government catalog under NSN 5340-01-024-5312. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 100-200-7-5D

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.