PartsTable
Technical Data Sheet
Download PDF

100-200-1-6 — TAPE,MEASURING

✓ Government record, cited
MEDION · ORING SEAL
PRODUCT OVERVIEW

100-200-1-6: TAPE,MEASURING.

The TAPE,MEASURING is a MEDION tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include width: 1.0 INCHES NOMINAL IN, weight: 1.6 OUNCES OZ, special_features: HEIGHT 1 INCH; LENGTH 8 INCHES IN, reading_direction: LEFT TO RIGHT, part_name_assigned_by_controlling_agency: POLARIZATION VERNIER TAPE; RANGER FEED. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-601-0417, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
100-200-1-6
NSN: 5340-00-601-0417
NIINs: 006010417, 016632623
FSC: 5340 — Hardware, Commercial
CAGE: 99378 — ATLEE OF DELAWARE, INCORPORATED (USA)
SPECIFICATIONS
width1.0 INCHES NOMINAL IN
weight1.6 OUNCES OZ
special_featuresHEIGHT 1 INCH; LENGTH 8 INCHES IN
reading_directionLEFT TO RIGHT
part_name_assigned_by_controlling_agencyPOLARIZATION VERNIER TAPE; RANGER FEED
NSN5340-00-601-0417
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 100-200-1-6 MFR: MEDION ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 1.188 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
LOOP/HOLDING DIMENSION: 0.440 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.012 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO END: 0.280 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
WIDTH: 0.420 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.490 INCHES NOMINAL IN
LENGTH1.188 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
LOOP/HOLDING DIMENSION0.440 INCHES NOMINAL IN
MATERIAL THICKNESS0.012 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO END0.280 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
WIDTH0.420 INCHES NOMINAL IN
MATERIALSTEEL COMP 1065 OVERALL
HOLE DIAMETER0.093 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
703499-21Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 100-200-1-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 100-200-1-6?
100-200-1-6 is a TAPE,MEASURING manufactured by MEDION.
What parts can replace 100-200-1-6?
There is 1 known substitute for 100-200-1-6: 703499-21. Substitute compatibility should be verified for your specific system.
What is the NSN for 100-200-1-6?
100-200-1-6 is cataloged in the U.S. Government catalog under NSN 5340-00-601-0417. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 100-200-1-6

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.