PartsTable
Technical Data Sheet
PartsTable / MRO / 100-152
100-152 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAPACITOR,FIXED,METALLIZED,PAPER. Key specifications include material: PLASTIC CASE, body_style: W/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES, body_width: 0.170 INCHES NOMINAL IN, flow_angle: 90.0 DEGREES SECOND END, head_style: PAN, seat_angle: 45.0 DEGREES SECOND END. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-065-4828, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 100-152
NSN: 5331-00-065-4828
FSC: 5331 — O-RING
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialPLASTIC CASE
body_styleW/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES
body_width0.170 INCHES NOMINAL IN
flow_angle90.0 DEGREES SECOND END
head_stylePAN
seat_angle45.0 DEGREES SECOND END
body_height0.240 INCHES NOMINAL IN
body_length0.650 INCHES NOMINAL IN
temp_rating-40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class1A SECOND END A
coil_quantity1
exterior_colorBLACK
NSN5331-00-065-4828
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 100-152 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CENTER HOLE DIAMETER: 3.222 INCHES MINIMUM AND 3.252 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 3.443 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CENTER HOLE DIAMETER3.222 INCHES MINIMUM AND 3.252 INCHES MAXIMUM IN
OUTSIDE DIAMETER3.443 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
100152Interchangeable
interchangeable cross-reference
interchangeable
07-100152Interchangeable
interchangeable cross-reference
interchangeable
NV6P203-2G11Interchangeable
interchangeable cross-reference
interchangeable
PRP6227-7Interchangeable
interchangeable cross-reference
interchangeable
214324Interchangeable
interchangeable cross-reference
interchangeable
AN6227B4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 100-152?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 100-152?
100-152 is a CAPACITOR,FIXED,METALLIZED,PAPER. It is classified as a MRO (MRO_GENERAL).
What parts can replace 100-152?
There are 18 known substitutes for 100-152: 100152, 07-100152, NV6P203-2G11 and 15 more. Substitute compatibility should be verified for your specific system.
Is 100-152 still available?
100-152 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 100-152

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026