PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 100-0727-000
100-0727-000 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: CELLULOSE OVERALL, outside_diameter: 9.812 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 9.062 INCHES NOMINAL IN, cross-sectional_thickness: 0.031 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-143-8482, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
100-0727-000
NSN: 5330-00-143-8482
FSC: 5330
CAGE: 76371 — MECHANICAL EQUIPMENT COMPANY, INC. DBA MECHANICAL EQUIPMENT CO INC (USA)
SPECIFICATIONS
materialCELLULOSE OVERALL
outside_diameter9.812 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter9.062 INCHES NOMINAL IN
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-143-8482
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 100-0727-000 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APERTURE DIAMETER: 9.062 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 9.812 INCHES NOMINAL IN
•
MATERIAL: CELLULOSE OVERALL
•
STYLE DESIGNATOR: CIRCULAR
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE DIAMETER9.062 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
OUTSIDE DIAMETER9.812 INCHES NOMINAL IN
MATERIALCELLULOSE OVERALL
STYLE DESIGNATORCIRCULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
100727Interchangeable
interchangeable cross-reference
interchangeable
989110-14BInterchangeable
interchangeable cross-reference
interchangeable
17205Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 100-0727-000?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 100-0727-000?
100-0727-000 is a GASKET.
What parts can replace 100-0727-000?
There are 3 known substitutes for 100-0727-000: 100727, 989110-14B, 17205. Substitute compatibility should be verified for your specific system.
What is the NSN for 100-0727-000?
100-0727-000 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-143-8482. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 100-0727-000

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026