PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 100-046S68B1
100-046S68B1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BUTTON,PLUG is a the manufacturer industrial component. Key specifications include material: STEEL, head_height: 0.094 INCHES NOMINAL IN, overall_height: 0.297 INCHES NOMINAL IN, prong_quantity: 12, style_designator: STANDARD, head_outside_diameter: 1.312 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-596-2698, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
100-046S68B1
NSN: 5340-00-596-2698
FSC: 5340
CAGE: 0ZJZ0 — AMERICAN ENGINEERED COMPONENTS (USA)
SPECIFICATIONS
materialSTEEL
head_height0.094 INCHES NOMINAL IN
overall_height0.297 INCHES NOMINAL IN
prong_quantity12
style_designatorSTANDARD
head_outside_diameter1.312 INCHES NOMINAL IN
prong_outside_diameter1.062 INCHES NOMINAL IN
hole_accommodation_diameter1.062 INCHES NOMINAL IN
material_accommodated_thickness0.031 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
NSN5340-00-596-2698
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 100-046S68B1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE ACCOMMODATION DIAMETER: 1.062 INCHES NOMINAL IN
•
MATERIAL ACCOMMODATED THICKNESS: 0.031 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
•
PRONG QUANTITY: 12
•
MATERIAL: STEEL
•
STYLE DESIGNATOR: STANDARD
•
HEAD OUTSIDE DIAMETER: 1.312 INCHES NOMINAL IN
•
PRONG OUTSIDE DIAMETER: 1.062 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL HEIGHT0.297 INCHES NOMINAL IN
HOLE ACCOMMODATION DIAMETER1.062 INCHES NOMINAL IN
MATERIAL ACCOMMODATED THICKNESS0.031 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
PRONG QUANTITY12
MATERIALSTEEL
STYLE DESIGNATORSTANDARD
HEAD OUTSIDE DIAMETER1.312 INCHES NOMINAL IN
PRONG OUTSIDE DIAMETER1.062 INCHES NOMINAL IN
HEAD HEIGHT0.094 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
AIR-1034Interchangeable
interchangeable cross-reference
interchangeable
5346Interchangeable
interchangeable cross-reference
interchangeable
372519Interchangeable
interchangeable cross-reference
interchangeable
D3811Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 100-046S68B1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 100-046S68B1?
100-046S68B1 is a BUTTON,PLUG.
What parts can replace 100-046S68B1?
There are 4 known substitutes for 100-046S68B1: AIR-1034, 5346, 372519 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 100-046S68B1?
100-046S68B1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-596-2698. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 100-046S68B1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026