PartsTable
Technical Data Sheet
Download PDF

100-0000-070 — SEAL,NONMETALLIC SPECIAL SHAPED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

100-0000-070: SEAL,NONMETALLIC SPECIAL SHAPED.

SEAL,NONMETALLIC SPECIAL SHAPED. Key specifications include material: RUBBER SILICONE CLASS Q OVERALL, construction: ONE-PIECEONE-PIECE, aperture_width: 6.530 INCHES MINIMUM AND 6.530 INCHES MINIMUM AND 6.550 INCHES MAXIMUM6.550 INCHES MAXIMUM IN, aperture_length: 5.070 INCHES MINIMUM AND 5.070 INCHES MINIMUM AND 5.090 INCHES MAXIMUM5.090 INCHES MAXIMUM IN, style_designator: D SHAPE, inside_corner_radius: 45.000 INCHES NOMINAL45.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-255-5287, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
100-0000-070
NSN: 5330-01-255-5287
FSC: 5330 — Packing and Gasket Materials
CAGE: 30528 — HOLLINGSEAD INTERNATIONAL, LLC (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q OVERALL
constructionONE-PIECEONE-PIECE
aperture_width6.530 INCHES MINIMUM AND 6.530 INCHES MINIMUM AND 6.550 INCHES MAXIMUM6.550 INCHES MAXIMUM IN
aperture_length5.070 INCHES MINIMUM AND 5.070 INCHES MINIMUM AND 5.090 INCHES MAXIMUM5.090 INCHES MAXIMUM IN
style_designatorD SHAPE
inside_corner_radius45.000 INCHES NOMINAL45.000 INCHES NOMINAL IN
cross-sectional_width5.640 INCHES MINIMUM AND 5.640 INCHES MINIMUM AND 6.640 INCHES MAXIMUM6.640 INCHES MAXIMUM IN
outside_corner_radius45.000 INCHES NOMINAL45.000 INCHES NOMINAL IN
cross-sectional_height7.070 INCHES MINIMUM AND 7.070 INCHES MINIMUM AND 7.130 INCHES MAXIMUM7.130 INCHES MAXIMUM IN
cross-sectional_shape_styleD SHAPED SHAPE
specification/standard_data30528-100-0000-070 MANUFACTURERS STANDARD
NSN5330-01-255-5287
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 100-0000-070 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 7.070 INCHES MINIMUM AND 7.070 INCHES MINIMUM AND 7.130 INCHES MAXIMUM7.130 INCHES MAXIMUM IN
•
INSIDE CORNER RADIUS: 45.000 INCHES NOMINAL45.000 INCHES NOMINAL IN
•
CROSS-SECTIONAL WIDTH: 5.640 INCHES MINIMUM AND 5.640 INCHES MINIMUM AND 6.640 INCHES MAXIMUM6.640 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: D SHAPE
•
CROSS-SECTIONAL SHAPE STYLE: D SHAPED SHAPE
•
APERTURE WIDTH: 6.530 INCHES MINIMUM AND 6.530 INCHES MINIMUM AND 6.550 INCHES MAXIMUM6.550 INCHES MAXIMUM IN
•
SPECIFICATION/STANDARD DATA: 30528-100-0000-070 MANUFACTURERS STANDARD
•
APERTURE LENGTH: 5.070 INCHES MINIMUM AND 5.070 INCHES MINIMUM AND 5.090 INCHES MAXIMUM5.090 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT7.070 INCHES MINIMUM AND 7.070 INCHES MINIMUM AND 7.130 INCHES MAXIMUM7.130 INCHES MAXIMUM IN
INSIDE CORNER RADIUS45.000 INCHES NOMINAL45.000 INCHES NOMINAL IN
CROSS-SECTIONAL WIDTH5.640 INCHES MINIMUM AND 5.640 INCHES MINIMUM AND 6.640 INCHES MAXIMUM6.640 INCHES MAXIMUM IN
STYLE DESIGNATORD SHAPE
CROSS-SECTIONAL SHAPE STYLED SHAPED SHAPE
APERTURE WIDTH6.530 INCHES MINIMUM AND 6.530 INCHES MINIMUM AND 6.550 INCHES MAXIMUM6.550 INCHES MAXIMUM IN
SPECIFICATION/STANDARD DATA30528-100-0000-070 MANUFACTURERS STANDARD
APERTURE LENGTH5.070 INCHES MINIMUM AND 5.070 INCHES MINIMUM AND 5.090 INCHES MAXIMUM5.090 INCHES MAXIMUM IN
OUTSIDE CORNER RADIUS45.000 INCHES NOMINAL45.000 INCHES NOMINAL IN
MATERIALRUBBER SILICONE CLASS Q OVERALL
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 100-0000-070?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 100-0000-070?
100-0000-070 is a SEAL,NONMETALLIC SPECIAL SHAPED.
What is the NSN for 100-0000-070?
100-0000-070 is cataloged in the U.S. Government catalog under NSN 5330-01-255-5287. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 100-0000-070

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.