PartsTable
Technical Data Sheet
PartsTable / MRO / 100 261
100 261 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAPACITOR,FIXED,PAPER DIELECTRIC. Key specifications include material: STEEL CORROSION RESISTING OVERALL, body_style: RIGHT ANGLE TYPE, head_style: FLAT CHAMFER, body_height: 0.300 INCHES NOMINAL IN, body_length: 1.656 INCHES NOMINAL IN, head_height: 0.188 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-079-9442, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 100 261
NSN: 5330-00-079-9442
FSC: 5330
CAGE: 05283 — SHEFFER CORP (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
body_styleRIGHT ANGLE TYPE
head_styleFLAT CHAMFER
body_height0.300 INCHES NOMINAL IN
body_length1.656 INCHES NOMINAL IN
head_height0.188 INCHES NOMINAL IN
thread_class2A A
body_diameter0.688 INCHES NOMINAL IN
head_diameter0.312 INCHES NOMINAL IN
overall_width0.360 INCHES NOMINAL IN
terminal_typePIN SINGLE MATING END SINGLE CONTACT GROUPING
thread_length0.500 INCHES MINIMUM IN
NSN5330-00-079-9442
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 100 261 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESCROSS-SECTIONAL SHAPE STYLE:116 IRREGULAR SHAPE FROM OLD FIIG A03200
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
P10362Interchangeable
interchangeable cross-reference
interchangeable
ALC116Interchangeable
interchangeable cross-reference
interchangeable
501294-02Interchangeable
interchangeable cross-reference
interchangeable
M1000-00005Interchangeable
interchangeable cross-reference
interchangeable
10026-1Interchangeable
interchangeable cross-reference
interchangeable
100261REVEInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 100 261?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 100 261?
100 261 is a CAPACITOR,FIXED,PAPER DIELECTRIC. It is classified as a MRO (MRO_GENERAL).
What parts can replace 100 261?
There are 7 known substitutes for 100 261: P10362, ALC116, 501294-02 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 100 261?
100 261 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-079-9442. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 100 261

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026