PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10-806
10-806 ✓ Verified by PartsTable
Jumbo · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The Portapuzzle Standard can store jigsaw puzzles up to 1500 pieces (90x60cm) securely and is the perfect size for you to relax and puzzle wherever you are. The Portapuzzle Standard measures 91x65x4cm. (Jigsaw puzzle NOT included) This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-061-0105, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10-806
NSN: 5306-00-061-0105
FSC: 5306
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
spacerNOT INCLUDED
diameter0.043 INCHES MINIMUM AND 0.047 INCHES MAXIMUM IN
materialASBESTOS INSULATION
tip_typeMALE HEXAGONAL
clamp_nutINCLUDED
end_pilotNOT INCLUDED
body_shapeROUND
drive_typeSPANNER
head_stylePAN NO. 2
point_typeSTANDARD
rib_length0.388 INCHES MINIMUM AND 0.398 INCHES MAXIMUM IN
shank_typeMORSE TAPER
NSN5306-00-061-0105
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 10-806 · Jumbo ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RIB LENGTH: 0.388 INCHES MINIMUM AND 0.398 INCHES MAXIMUM IN
•
HEAD DIAMETER: 0.750 INCHES NOMINAL IN
•
RIB MAJOR DIAMETER: 0.550 INCHES MINIMUM AND 0.560 INCHES MAXIMUM IN
•
SHOULDER LENGTH: 0.388 INCHES MINIMUM AND 0.398 INCHES MAXIMUM FIRST SHOULDER IN
•
SHOULDER SHAPE: RIBBED FIRST SHOULDER
•
RIB MINOR DIAMETER: 0.526 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
•
MINIMUM TENSILE STRENGTH: 110000 POUNDS PER SQUARE INCH LBS
•
FASTENER LENGTH: 1.375 INCHES MINIMUM AND 1.391 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
RIB LENGTH0.388 INCHES MINIMUM AND 0.398 INCHES MAXIMUM IN
HEAD DIAMETER0.750 INCHES NOMINAL IN
RIB MAJOR DIAMETER0.550 INCHES MINIMUM AND 0.560 INCHES MAXIMUM IN
SHOULDER LENGTH0.388 INCHES MINIMUM AND 0.398 INCHES MAXIMUM FIRST SHOULDER IN
SHOULDER SHAPERIBBED FIRST SHOULDER
RIB MINOR DIAMETER0.526 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
MINIMUM TENSILE STRENGTH110000 POUNDS PER SQUARE INCH LBS
FASTENER LENGTH1.375 INCHES MINIMUM AND 1.391 INCHES MAXIMUM IN
THREAD SERIES DESIGNATORUNF
HEAD HEIGHT0.229 INCHES MINIMUM AND 0.239 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
10806Interchangeable
interchangeable cross-reference
interchangeable
BH7/64Interchangeable
interchangeable cross-reference
interchangeable
5130-00-134-7785Interchangeable
interchangeable cross-reference
interchangeable
B8562Interchangeable
interchangeable cross-reference
interchangeable
FP84791Interchangeable
interchangeable cross-reference
interchangeable
5298445Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10-806?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10-806?
10-806 is a LOCKNUT,ELECTRICAL CONDUIT manufactured by Jumbo.
What parts can replace 10-806?
There are 18 known substitutes for 10-806: 10806, BH7/64, 5130-00-134-7785 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10-806?
10-806 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-061-0105. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10-806

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026