10-8,BRASS — RIVET,TUBULAR

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

10-8,BRASS: RIVET,TUBULAR.

The RIVET,TUBULAR is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, head_style: COUNTERSUNK W/ REVERSE CHAMFER, hole_depth: 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN, grip_length: 0.450 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, head_height: 0.053 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN, shank_style: TUBULAR. This part is cataloged in the U.S.

Government catalog under NSN 5320-01-370-9128, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

10-8,BRASS

NSN: 5320-01-370-9128
FSC: 5320 — Rivets
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)

SPECIFICATIONS

material	COPPER ALLOY OVERALL
head_style	COUNTERSUNK W/ REVERSE CHAMFER
hole_depth	0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
grip_length	0.450 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
head_height	0.053 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
shank_style	TUBULAR
hole_diameter	0.173 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN
shank_diameter	0.244 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
fastener_length	0.543 INCHES MINIMUM AND 0.577 INCHES MAXIMUM IN
countersink_angle	150.0 DEGREES NOMINAL
head_major_diameter	0.458 INCHES MINIMUM AND 0.478 INCHES MAXIMUM IN
specification/standard_data	81343-SAE J663 GOVERNMENT SPECIFICATION
NSN	5320-01-370-9128

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.244 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN

•

HEAD HEIGHT: 0.053 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.543 INCHES MINIMUM AND 0.577 INCHES MAXIMUM IN

•

HOLE DEPTH: 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN

•

HEAD STYLE: COUNTERSUNK W/ REVERSE CHAMFER

•

SPECIFICATION/STANDARD DATA: 81343-SAE J663 GOVERNMENT SPECIFICATION

•

GRIP LENGTH: 0.450 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN

•

SHANK STYLE: TUBULAR

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.244 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
HEAD HEIGHT	0.053 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
FASTENER LENGTH	0.543 INCHES MINIMUM AND 0.577 INCHES MAXIMUM IN
HOLE DEPTH	0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
HEAD STYLE	COUNTERSUNK W/ REVERSE CHAMFER
SPECIFICATION/STANDARD DATA	81343-SAE J663 GOVERNMENT SPECIFICATION
GRIP LENGTH	0.450 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
SHANK STYLE	TUBULAR
COUNTERSINK ANGLE	150.0 DEGREES NOMINAL
MATERIAL	COPPER ALLOY OVERALL

SUBSTITUTES & CROSS-REFERENCES 1

J663Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 10-8,BRASS?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 10-8,BRASS?

10-8,BRASS is a RIVET,TUBULAR.

What parts can replace 10-8,BRASS?

There is 1 known substitute for 10-8,BRASS: J663. Substitute compatibility should be verified for your specific system.

What is the NSN for 10-8,BRASS?

10-8,BRASS is cataloged in the U.S. Government catalog under NSN 5320-01-370-9128. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

10-8,BRASS — RIVET,TUBULAR

Request a Quote — 10-8,BRASS