PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10-75260
10-75260 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BUMPER is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, hole_depth: 0.344 INCHES NOMINAL IN, hole_diameter: 0.250 INCHES NOMINAL IN, overall_height: 0.594 INCHES NOMINAL IN, style_designator: FLAT RECESSED TOP, outside/top_flange_diameter: 0.531 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-200-6404, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10-75260
NSN: 5340-00-200-6404
FSC: 5340
CAGE: 28839 — TELEDYNE INDUSTRIES INC TELEDYNE POWER SYSTEMS DIV (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
hole_depth0.344 INCHES NOMINAL IN
hole_diameter0.250 INCHES NOMINAL IN
overall_height0.594 INCHES NOMINAL IN
style_designatorFLAT RECESSED TOP
outside/top_flange_diameter0.531 INCHES NOMINAL IN
NSN5340-00-200-6404
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10-75260 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.250 INCHES NOMINAL IN
•
HOLE DEPTH: 0.344 INCHES NOMINAL IN
•
STYLE DESIGNATOR: FLAT RECESSED TOP
•
OUTSIDE/TOP FLANGE DIAMETER: 0.531 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.250 INCHES NOMINAL IN
HOLE DEPTH0.344 INCHES NOMINAL IN
STYLE DESIGNATORFLAT RECESSED TOP
OUTSIDE/TOP FLANGE DIAMETER0.531 INCHES NOMINAL IN
OVERALL HEIGHT0.594 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
1684Upgraded Successor
successor cross-reference
successor
6515NCM050282Upgraded Successor
successor cross-reference
successor
505102Upgraded Successor
successor cross-reference
successor
9-904-101883Interchangeable
interchangeable cross-reference
interchangeable
1653121C1Interchangeable
interchangeable cross-reference
interchangeable
10705VInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10-75260?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10-75260?
10-75260 is a BUMPER.
What parts can replace 10-75260?
There are 16 known substitutes for 10-75260: 1684, 6515NCM050282, 505102 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10-75260?
10-75260 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-200-6404. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10-75260

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026