PartsTable / MRO / 10-7409
10-7409
✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SPRING HOIST is a the manufacturer industrial component. Key specifications include material: ASBESTOS AND RUBBER SYNTHETIC OVERALL, outside_diameter: 2.672 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 2.458 INCHES MINIMUM AND 2.478 INCHES MAXIMUM IN, cross-sectional_thickness: 0.026 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-157-0090, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MRO →
MRO_GENERAL →
10-7409
NSN: 5330-00-157-0090 FSC: 5330 CAGE: 77820 — AMPHENOL CORP DIV AMPHENOL AEROSPACE OPERATIONS (USA)
SPECIFICATIONS
material ASBESTOS AND RUBBER SYNTHETIC OVERALL outside_diameter 2.672 INCHES NOMINAL IN style_designator CIRCULAR aperture_diameter 2.458 INCHES MINIMUM AND 2.478 INCHES MAXIMUM IN cross-sectional_thickness 0.026 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN cross-sectional_shape_style SOLID SINGLE OR COMPOSITION material_document_and_classification AMS 3232 ASSN STD SINGLE MATERIAL RESPONSE OVERALL NSN 5330-00-157-0090
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 10-7409
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CROSS-SECTIONAL THICKNESS: 0.026 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
• APERTURE DIAMETER: 2.458 INCHES MINIMUM AND 2.478 INCHES MAXIMUM IN
• CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
• MATERIAL: ASBESTOS AND RUBBER SYNTHETIC OVERALL
• STYLE DESIGNATOR: CIRCULAR
• MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3232 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
• OUTSIDE DIAMETER: 2.672 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS 0.026 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN APERTURE DIAMETER 2.458 INCHES MINIMUM AND 2.478 INCHES MAXIMUM IN CROSS-SECTIONAL SHAPE STYLE SOLID SINGLE OR COMPOSITION MATERIAL ASBESTOS AND RUBBER SYNTHETIC OVERALL STYLE DESIGNATOR CIRCULAR MATERIAL DOCUMENT AND CLASSIFICATION AMS 3232 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OUTSIDE DIAMETER 2.672 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
107409 Interchangeable interchangeable cross-reference
interchangeable
P116 Interchangeable interchangeable cross-reference
interchangeable
702-70789 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 10-7409?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10-7409?
10-7409 is a SPRING HOIST. It is classified as a MRO (MRO_GENERAL).
What parts can replace 10-7409?
There are 3 known substitutes for 10-7409: 107409, P116, 702-70789. Substitute compatibility should be verified for your specific system.
Is 10-7409 still available?
10-7409 is currently cancelled.
Request a Quote — 10-7409