The PLATE,MOUNTING is a the manufacturer industrial component. Key specifications include shape: FLAT AND RECTANGULAR AND IRREGULAR, width: 0.74 INCHES MINIMUM AND 0.76 INCHES MAXIMUM IN, length: 10.95 INCHES MINIMUM AND 10.97 INCHES MAXIMUM IN, material: ALUMINUM ALLOY 5052, thickness: 0.063 INCHES NOMINAL IN, heat_treatment: H-32 STRAIN HARDENED, STABILIZED TO 1/4 HARD. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-679-3241, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
10-53241
NSN:5340-01-679-3241 FSC:5340 — Hardware, Commercial CAGE:30554 — DEPARTMENT OF DEFENSE PROJECT MANAGER-MOBILE ELECTRIC POWER (USA)
SPECIFICATIONS
shape
FLAT AND RECTANGULAR AND IRREGULAR
width
0.74 INCHES MINIMUM AND 0.76 INCHES MAXIMUM IN
length
10.95 INCHES MINIMUM AND 10.97 INCHES MAXIMUM IN
material
ALUMINUM ALLOY 5052
thickness
0.063 INCHES NOMINAL IN
heat_treatment
H-32 STRAIN HARDENED, STABILIZED TO 1/4 HARD
special_features
RECOMMENDED SURFACE FINISH IS IRIDITE NCP; HAS 11 0.265 - 0.275 INCH NOTCHES ALONG ONE EDGE IN
surface_treatment
PASSIVATE
mounting_hole_type
THRU HOLE
mounting_hole_diameter
0.228 INCHES MINIMUM AND 0.238 INCHES MAXIMUM ALL HOLES IN
mounting_hole_quantity
3
end_item_identification
4120-01-592-7949
NSN
5340-01-679-3241
COMPONENT DIAGRAM
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 3
•
LENGTH: 10.95 INCHES MINIMUM AND 10.97 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-DTL-5541, TYPE II, CLASS 1A MIL SPEC SINGLE TREATMENT RESPONSE A
•
HEAT TREATMENT: H-32 STRAIN HARDENED, STABILIZED TO 1/4 HARD
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE AMS4016 INTERNATIONAL STD/SPEC SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.228 INCHES MINIMUM AND 0.238 INCHES MAXIMUM ALL HOLES IN
•
SHAPE: FLAT AND RECTANGULAR AND IRREGULAR
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY
3
LENGTH
10.95 INCHES MINIMUM AND 10.97 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
MIL-DTL-5541, TYPE II, CLASS 1A MIL SPEC SINGLE TREATMENT RESPONSE A
HEAT TREATMENT
H-32 STRAIN HARDENED, STABILIZED TO 1/4 HARD
MATERIAL DOCUMENT AND CLASSIFICATION
SAE AMS4016 INTERNATIONAL STD/SPEC SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER
0.228 INCHES MINIMUM AND 0.238 INCHES MAXIMUM ALL HOLES IN
SHAPE
FLAT AND RECTANGULAR AND IRREGULAR
SPECIAL FEATURES
RECOMMENDED SURFACE FINISH IS IRIDITE NCP; HAS 11 0.265 - 0.275 INCH NOTCHES ALONG ONE EDGE IN
SURFACE TREATMENT
PASSIVATE
WIDTH
0.74 INCHES MINIMUM AND 0.76 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10-53241?
10-53241 is a PLATE,MOUNTING.
What is the NSN for 10-53241?
10-53241 is cataloged in the U.S. Government catalog under NSN 5340-01-679-3241. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.