PartsTable
Technical Data Sheet
PartsTable / MRO / 10-516
10-516 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include width: 48.000 INCHES NOMINAL IN, length: 100.000 FEET NOMINAL FT, material: ALUMINUM ALLOY, edge_type: SELVAGED EDGE, nut_style: HEXAGON, body_style: RECTANGULAR. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-208-4124, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 10-516
NSN: 5310-00-208-4124
FSC: 5310
CAGE: 82423 — KLEINSCHMIDT INC (USA)
SPECIFICATIONS
width48.000 INCHES NOMINAL IN
length100.000 FEET NOMINAL FT
materialALUMINUM ALLOY
edge_typeSELVAGED EDGE
nut_styleHEXAGON
body_styleRECTANGULAR
body_width0.250 INCHES NOMINAL IN
nut_height0.123 INCHES NOMINAL IN
weave_typeOBLONG
body_height0.250 INCHES NOMINAL IN
body_length1.250 INCHES NOMINAL IN
thread_class2B
NSN5310-00-208-4124
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10-516 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BEARING SURFACE TYPE: FLAT
•
THREAD QUANTITY PER INCH: 32
•
NOMINAL THREAD SIZE: 0.164 INCHES IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD CLASS: 2B
•
NUT HEIGHT: 0.123 INCHES NOMINAL IN
•
WIDTH ACROSS FLATS: 0.312 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS (FLIS)
BEARING SURFACE TYPEFLAT
THREAD QUANTITY PER INCH32
NOMINAL THREAD SIZE0.164 INCHES IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD CLASS2B
NUT HEIGHT0.123 INCHES NOMINAL IN
WIDTH ACROSS FLATS0.312 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
SURFACE TREATMENTNICKEL OVERALL
MATERIALCOPPER ALLOY 360 OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
BE10373-001Interchangeable
interchangeable cross-reference
interchangeable
6049-5102Interchangeable
interchangeable cross-reference
interchangeable
BTC-8044Interchangeable
interchangeable cross-reference
interchangeable
SCD10516Interchangeable
interchangeable cross-reference
interchangeable
4410-0554Interchangeable
interchangeable cross-reference
interchangeable
10516Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10-516?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10-516?
10-516 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace 10-516?
There are 16 known substitutes for 10-516: BE10373-001, 6049-5102, BTC-8044 and 13 more. Substitute compatibility should be verified for your specific system.
Is 10-516 still available?
10-516 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10-516

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026