PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10-417-6
10-417-6 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, body_width: 1.094 INCHES MAXIMUM IN, cone_width: 1.1965 INCHES NOMINAL IN, body_height: 1.750 INCHES NOMINAL IN, body_length: 1.750 INCHES NOMINAL IN, bore_diameter: 1.3750 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0765, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10-417-6
NSN: 3110-00-100-0765
FSC: 3110
CAGE: 99832 — SCOTT HUBER ESSICK A CO OF FIGGIE INTERNATIONAL INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
body_width1.094 INCHES MAXIMUM IN
cone_width1.1965 INCHES NOMINAL IN
body_height1.750 INCHES NOMINAL IN
body_length1.750 INCHES NOMINAL IN
bore_diameter1.3750 INCHES NOMINAL IN
rating_methodELECTRICAL AND WINDING TURNS SINGLE COMPONENT SINGLE WINDING
turn_quantity8800 SINGLE COMPONENT SINGLE WINDING
inclosure_typeFULLY INCLOSED
mounting_methodTERMINAL SINGLE GROUP
frequency_rating60.0 HERTZ NOMINAL SINGLE COMPONENT
special_featuresSTEEL
NSN3110-00-100-0765
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 10-417-6 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE WIDTH: 1.1965 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
CONE CORNER RADIUS: 0.1406 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
BORE DIAMETER: 1.3750 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORNORMAL ANGLE
CONE WIDTH1.1965 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
CONE CORNER RADIUS0.1406 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
BORE DIAMETER1.3750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
705281Interchangeable
interchangeable cross-reference
interchangeable
1356DPC17Interchangeable
interchangeable cross-reference
interchangeable
254-00Interchangeable
interchangeable cross-reference
interchangeable
254Interchangeable
interchangeable cross-reference
interchangeable
LA500Interchangeable
interchangeable cross-reference
interchangeable
352080R91Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10-417-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10-417-6?
10-417-6 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace 10-417-6?
There are 28 known substitutes for 10-417-6: 705281, 1356DPC17, 254-00 and 25 more. Substitute compatibility should be verified for your specific system.
Is 10-417-6 still available?
10-417-6 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10-417-6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026