Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, hole_diameter: 0.193 INCHES MINIMUM AND 0.213 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.625 INCHES MINIMUM AND 1.641 INCHES MAXIMUM IN, overall_length: 1.625 INCHES MINIMUM AND 1.641 INCHES MAXIMUM IN, style_designator: NON-CIRCULAR, aperture_diameter: 1.375 INCHES MINIMUM AND 1.391 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-124-1295, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
10-40450-22
NSN:5330-00-124-1295 FSC:5330 CAGE:05147 — SMITH A O CORP ELECTRIC MOTORS DIV (USA)
SPECIFICATIONS
material
RUBBER SYNTHETIC OVERALL
hole_diameter
0.193 INCHES MINIMUM AND 0.213 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width
1.625 INCHES MINIMUM AND 1.641 INCHES MAXIMUM IN
overall_length
1.625 INCHES MINIMUM AND 1.641 INCHES MAXIMUM IN
style_designator
NON-CIRCULAR
aperture_diameter
1.375 INCHES MINIMUM AND 1.391 INCHES MAXIMUM IN
bolt_hole_quantity
4
end_item_identification
5895-01-556-1797
NSN
5330-00-124-1295
COMPONENT DIAGRAM
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
MATERIAL: STEEL OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.188 INCHES NOMINAL IN
•
OUTSIDE CORNER RADIUS: 0.188 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 1.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
STYLE DESIGNATOR: NON-CIRCULAR
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLE
SOLID SINGLE OR COMPOSITION
MATERIAL
STEEL OVERALL
CROSS-SECTIONAL THICKNESS
0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH
0.188 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS
0.188 INCHES NOMINAL IN
OVERALL WIDTH
1.625 INCHES MINIMUM AND 1.641 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH
1.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
STYLE DESIGNATOR
NON-CIRCULAR
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH
1.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
HOLE DIAMETER
0.203 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10-40450-22?
10-40450-22 is a GASKET.
What parts can replace 10-40450-22?
There are 7 known substitutes for 10-40450-22: 10-40450-22, 70-1228-4, 10266-28 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10-40450-22?
10-40450-22 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-124-1295. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.