PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10-40450-14
10-40450-14 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, hole_diameter: 0.172 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.188 INCHES NOMINAL IN, overall_length: 1.188 INCHES NOMINAL IN, hardness_rating: 75.0 SHORE DUROMETER A MINIMUM AND 85.0 SHORE DUROMETER A MAXIMUM OVERALL, style_designator: NON-CIRCULAR. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-364-9812, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10-40450-14
NSN: 5330-00-364-9812
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR OVERALL
hole_diameter0.172 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.188 INCHES NOMINAL IN
overall_length1.188 INCHES NOMINAL IN
hardness_rating75.0 SHORE DUROMETER A MINIMUM AND 85.0 SHORE DUROMETER A MAXIMUM OVERALL
style_designatorNON-CIRCULAR
aperture_diameter0.875 INCHES NOMINAL IN
bolt_hole_quantity4
outside_corner_radius0.141 INCHES NOMINAL IN
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationASTM D2000 2BC815ABF1 ASSN STD ALL MATERIAL RESPONSES OVERALL
NSN5330-00-364-9812
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10-40450-14 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
MATERIAL DOCUMENT AND CLASSIFICATION: 10-40450-14 FSCM 28719 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
HOLE DIAMETER: 0.162 INCHES MINIMUM AND 0.182 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
CROSS-SECTIONAL THICKNESS: 0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 0.896 INCHES MINIMUM AND 0.916 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.272 INCHES MINIMUM AND 0.308 INCHES MAXIMUM IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH: 0.272 INCHES MINIMUM AND 0.308 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
MATERIAL DOCUMENT AND CLASSIFICATION10-40450-14 FSCM 28719 MFR REF SINGLE MATERIAL RESPONSE OVERALL
HOLE DIAMETER0.162 INCHES MINIMUM AND 0.182 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
CROSS-SECTIONAL THICKNESS0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH0.896 INCHES MINIMUM AND 0.916 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL WIDTH1.188 INCHES MINIMUM AND 1.204 INCHES MAXIMUM IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.272 INCHES MINIMUM AND 0.308 INCHES MAXIMUM IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.272 INCHES MINIMUM AND 0.308 INCHES MAXIMUM IN
OVERALL LENGTH1.188 INCHES MINIMUM AND 1.204 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
11243Interchangeable
interchangeable cross-reference
interchangeable
PRP902-27Interchangeable
interchangeable cross-reference
interchangeable
114261Interchangeable
interchangeable cross-reference
interchangeable
F16600Interchangeable
interchangeable cross-reference
interchangeable
16600Interchangeable
interchangeable cross-reference
interchangeable
24864Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10-40450-14?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10-40450-14?
10-40450-14 is a GASKET.
What parts can replace 10-40450-14?
There are 14 known substitutes for 10-40450-14: 11243, PRP902-27, 114261 and 11 more. Substitute compatibility should be verified for your specific system.
Is 10-40450-14 still available?
10-40450-14 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10-40450-14

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026