PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10-40450-10
10-40450-10 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include end_item_identification: CONTROL, MODULATOR (NEXT HIGHER ASSEMBLY); MV-22 AIRCRAFT (END ITEM), criticality_code_justification: AGAV. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-641-2389, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10-40450-10
NSN: 5330-00-641-2389
FSC: 5330
CAGE: 06845 — RAYTHEON COMPANY DBA RAYTHEON CO (USA)
SPECIFICATIONS
end_item_identificationCONTROL, MODULATOR (NEXT HIGHER ASSEMBLY); MV-22 AIRCRAFT (END ITEM)
criticality_code_justificationAGAV
NSN5330-00-641-2389
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10-40450-10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH: 0.141 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 0.719 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
BOLT HOLE QUANTITY: 4
•
APERTURE DIAMETER: 0.625 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 0.719 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.141 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.141 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH0.719 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
BOLT HOLE QUANTITY4
APERTURE DIAMETER0.625 INCHES NOMINAL IN
OVERALL LENGTH1.000 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH0.719 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.141 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.141 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
11446Interchangeable
interchangeable cross-reference
interchangeable
202683Interchangeable
interchangeable cross-reference
interchangeable
20268Interchangeable
interchangeable cross-reference
interchangeable
22632Interchangeable
interchangeable cross-reference
interchangeable
MEK7042Interchangeable
interchangeable cross-reference
interchangeable
1142161Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10-40450-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10-40450-10?
10-40450-10 is a GASKET.
What parts can replace 10-40450-10?
There are 24 known substitutes for 10-40450-10: 11446, 202683, 20268 and 21 more. Substitute compatibility should be verified for your specific system.
Is 10-40450-10 still available?
10-40450-10 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10-40450-10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026