PartsTable
Technical Data Sheet
Download PDF

10-3932 — WAVEGUIDE ASSEMBLY

✓ Government record, cited
Hama · BOLT SCREW
PRODUCT OVERVIEW

10-3932: WAVEGUIDE ASSEMBLY.

Highlights - Bag which holds and protects small digital cameras - Made of polyester material with imprint - Double zipper opening - Compartment for memory cards inside, with hook and loop strip - Neck strap with snap hook - Belt loop - Inside lining made of soft fleece This part is cataloged in the U.S. Government catalog under NSN 5305-00-013-3096, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10-3932
NSN: 5305-00-013-3096
NIINs: 000133096, 011364061
FSC: 5305 — Screws
CAGE: 27296 — HARLEY DAVIDSON MOTOR CO INC (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 6063 ALL TUBING SEGMENT AND FLANGE
head_styleROUND
flexibilityRIGID SINGLE TUBING SEGMENT
head_height0.198 INCHES MINIMUM AND 0.216 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.557 INCHES MINIMUM AND 0.590 INCHES MAXIMUM IN
thread_length0.750 INCHES NOMINAL IN
fastener_length0.750 INCHES NOMINAL IN
flange_quantity2
style_designatorFIVE BEND TYPE
thread_directionRIGHT-HAND
surface_treatmentPAINT ALL TUBING SEGMENT AND FLANGE OUTSIDE SURFACES
NSN5305-00-013-3096
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 10-3932 · Hama ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.198 INCHES MINIMUM AND 0.216 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: PHOSPHATE
•
FASTENER LENGTH: 0.750 INCHES NOMINAL IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC ALL MATERIAL RESPONSES
•
THREAD LENGTH: 0.750 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
•
HEAD STYLE: ROUND
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.198 INCHES MINIMUM AND 0.216 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTPHOSPHATE
FASTENER LENGTH0.750 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633 FED SPEC ALL MATERIAL RESPONSES
THREAD LENGTH0.750 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.312 INCHES IN
HEAD STYLEROUND
THREAD DIRECTIONRIGHT-HAND
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 1S STYLE
INTERNAL DRIVE STYLESLOT
SUBSTITUTES & CROSS-REFERENCES 2
133096Reference document
Same NSN cross-reference
Reference document — Secondary reference
FFS92TYPE1STYLE1SReference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 10-3932?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10-3932?
10-3932 is a WAVEGUIDE ASSEMBLY manufactured by Hama.
What parts can replace 10-3932?
There are 2 known substitutes for 10-3932: 133096, FFS92TYPE1STYLE1S. Substitute compatibility should be verified for your specific system.
What is the NSN for 10-3932?
10-3932 is cataloged in the U.S. Government catalog under NSN 5305-00-013-3096. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10-3932