PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10-366
10-366 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include length: 8.625 INCHES MINIMUM AND 8.687 INCHES MAXIMUM IN, material: RUBBER SYNTHETIC, mesh_size: 4.0, body_length: 2.250 INCHES NOMINAL IN, design_type: SINGLE CENTRALLY LOCATED HOLE, body_diameter: 3.995 INCHES MINIMUM AND 4.000 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-118-5626, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10-366
NSN: 5330-00-118-5626
FSC: 5330
CAGE: 70188 — FRANKLIN ENGINE CO INC (USA)
SPECIFICATIONS
length8.625 INCHES MINIMUM AND 8.687 INCHES MAXIMUM IN
materialRUBBER SYNTHETIC
mesh_size4.0
body_length2.250 INCHES NOMINAL IN
design_typeSINGLE CENTRALLY LOCATED HOLE
body_diameter3.995 INCHES MINIMUM AND 4.000 INCHES MAXIMUM IN
flange_height10.000 INCHES NOMINAL IN
hole_diameter9.450 INCHES NOMINAL SINGLE HOLE IN
overall_width8.054 INCHES MINIMUM AND 8.074 INCHES MAXIMUM IN
wire_diameter0.04700 INCHES NOMINAL IN
overall_length14.625 INCHES NOMINAL IN
flange_diameter5.480 INCHES MINIMUM AND 5.485 INCHES MAXIMUM IN
NSN5330-00-118-5626
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10-366 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
HOLE DIAMETER: 0.334 INCHES MINIMUM AND 0.354 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
MATERIAL: ASBESTOS AND RUBBER SYNTHETIC OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.055 INCHES MINIMUM AND 0.071 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3232 ASSN STD ALL MATERIAL RESPONSES OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
HOLE DIAMETER0.334 INCHES MINIMUM AND 0.354 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
MATERIALASBESTOS AND RUBBER SYNTHETIC OVERALL
CROSS-SECTIONAL THICKNESS0.055 INCHES MINIMUM AND 0.071 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3232 ASSN STD ALL MATERIAL RESPONSES OVERALL
OVERALL LENGTH21.803 INCHES MINIMUM AND 21.823 INCHES MAXIMUM IN
OVERALL WIDTH8.054 INCHES MINIMUM AND 8.074 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
10366Interchangeable
interchangeable cross-reference
interchangeable
990-062-91Interchangeable
interchangeable cross-reference
interchangeable
90-062-90Interchangeable
interchangeable cross-reference
interchangeable
RW151806Interchangeable
interchangeable cross-reference
interchangeable
388106-00Interchangeable
interchangeable cross-reference
interchangeable
388106PHInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10-366?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10-366?
10-366 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 10-366?
There are 19 known substitutes for 10-366: 10366, 990-062-91, 90-062-90 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10-366?
10-366 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-118-5626. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10-366

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026