PartsTable
Technical Data Sheet
PartsTable / MRO / 10-365
10-365 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The BRACKET,EYE,NONROTATING SHAFT is a the manufacturer industrial component. Key specifications include width: 0.344 INCHES NOMINAL IN, material: STEEL, nut_style: CASTELLATED, HEXAGON, body_width: 1.000 INCHES NOMINAL IN, case_style: SQUARE, nut_height: 0.625 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-018-2424, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 10-365
NSN: 5310-00-018-2424
FSC: 5310
CAGE: 64392 — WEIL PUMP CO INC (USA)
SPECIFICATIONS
width0.344 INCHES NOMINAL IN
materialSTEEL
nut_styleCASTELLATED, HEXAGON
body_width1.000 INCHES NOMINAL IN
case_styleSQUARE
nut_height0.625 INCHES NOMINAL IN
seal_width0.391 INCHES NOMINAL IN
body_height3.000 INCHES NOMINAL IN
body_length3.000 INCHES NOMINAL IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
bolt_hole_size0.188 IN. DIA IN
NSN5310-00-018-2424
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10-365 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
NUT HEIGHT: 0.625 INCHES NOMINAL IN
•
BEARING SURFACE TYPE: CHAMFERED
•
NOMINAL THREAD SIZE: 0.562 INCHES IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD QUANTITY PER INCH: 12
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTPASSIVATE OVERALL
NUT HEIGHT0.625 INCHES NOMINAL IN
BEARING SURFACE TYPECHAMFERED
NOMINAL THREAD SIZE0.562 INCHES IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD QUANTITY PER INCH12
MATERIALSTEEL CORROSION RESISTING OVERALL
THREAD DIRECTIONRIGHT-HAND
NUT STYLECASTELLATED, HEXAGON
THREAD CLASS2B
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
10365Interchangeable
interchangeable cross-reference
interchangeable
889646PT5Interchangeable
interchangeable cross-reference
interchangeable
10534Interchangeable
interchangeable cross-reference
interchangeable
64137Interchangeable
interchangeable cross-reference
interchangeable
SM-B-187218Interchangeable
interchangeable cross-reference
interchangeable
430LXInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10-365?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10-365?
10-365 is a BRACKET,EYE,NONROTATING SHAFT. It is classified as a MRO (MRO_GENERAL).
What parts can replace 10-365?
There are 18 known substitutes for 10-365: 10365, 889646PT5, 10534 and 15 more. Substitute compatibility should be verified for your specific system.
Is 10-365 still available?
10-365 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10-365

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026