PartsTable
Technical Data Sheet
Download PDF

10-32X5-8 — SCREW,CAP

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

10-32X5-8: SCREW,CAP.

The SCREW,CAP is a the manufacturer industrial component. Key specifications include head_style: ROUND, head_height: 0.130 INCHES NOMINAL IN, thread_class: 2A A, head_diameter: 0.340 INCHES NOMINAL IN, thread_length: 0.625 INCHES NOMINAL IN, screw_material: STEEL. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-274-0731, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10-32X5-8
NSN: 5305-00-274-0731
NIINs: 002740731, 007937502, 008029531
FSC: 5305 — Screws
CAGE: 45722 — USM CORP SUB OF EMHART INDUSTRIES INC PARKER-KALON FASTENER DIV (USA)
SPECIFICATIONS
head_styleROUND
head_height0.130 INCHES NOMINAL IN
thread_class2A A
head_diameter0.340 INCHES NOMINAL IN
thread_length0.625 INCHES NOMINAL IN
screw_materialSTEEL
fastener_length0.625 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.190 INCHES IN
screw_surface_treatmentNICKEL
thread_quantity_per_inch32
NSN5305-00-274-0731
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 10-32X5-8 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.156 INCHES NOMINAL IN
•
HEAD HEIGHT: 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.625 INCHES NOMINAL IN
•
THREAD LENGTH: 0.625 INCHES NOMINAL IN
•
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM OVERALL
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: FLAT CHAMFER
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.156 INCHES NOMINAL IN
HEAD HEIGHT0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
FASTENER LENGTH0.625 INCHES NOMINAL IN
THREAD LENGTH0.625 INCHES NOMINAL IN
HARDNESS RATING80.0 ROCKWELL B MINIMUM OVERALL
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFLAT CHAMFER
THREAD DIRECTIONRIGHT-HAND
NONDEFINITIVE SPEC/STD DATA1 TYPE
SURFACE TREATMENTPASSIVATE OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
FFS86Reference document
Same NSN cross-reference
Reference document — Identification reference
FFS86TYPE1STYLE11Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 10-32X5-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10-32X5-8?
10-32X5-8 is a SCREW,CAP.
What parts can replace 10-32X5-8?
There are 2 known substitutes for 10-32X5-8: FFS86, FFS86TYPE1STYLE11. Substitute compatibility should be verified for your specific system.
What is the NSN for 10-32X5-8?
10-32X5-8 is cataloged in the U.S. Government catalog under NSN 5305-00-274-0731. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10-32X5-8