PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10-22822-06
10-22822-06 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR AND ASBESTOS OVERALL, hole_diameter: 0.160 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.700 INCHES NOMINAL IN, overall_length: 3.600 INCHES NOMINAL IN, outside_corner_radius: 0.060 INCHES NOMINAL IN, cross-sectional_thickness: 0.030 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-212-2310, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10-22822-06
NSN: 5330-01-212-2310
FSC: 5330
CAGE: 24785 — VICKERS INC (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR AND ASBESTOS OVERALL
hole_diameter0.160 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width2.700 INCHES NOMINAL IN
overall_length3.600 INCHES NOMINAL IN
bolt_hole_quantity6
outside_corner_radius0.060 INCHES NOMINAL IN
cross-sectional_thickness0.030 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-01-212-2310
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10-22822-06 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.030 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
•
BOLT HOLE QUANTITY: 6
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE CORNER RADIUS: 0.060 INCHES NOMINAL IN
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR AND ASBESTOS OVERALL
•
HOLE DIAMETER: 0.160 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.030 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
OVERALL LENGTH3.600 INCHES NOMINAL IN
BOLT HOLE QUANTITY6
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OUTSIDE CORNER RADIUS0.060 INCHES NOMINAL IN
MATERIALRUBBER CHLOROPRENE CLASS CR AND ASBESTOS OVERALL
OVERALL WIDTH2.700 INCHES NOMINAL IN
HOLE DIAMETER0.160 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
53421Interchangeable
interchangeable cross-reference
interchangeable
11740Interchangeable
interchangeable cross-reference
interchangeable
807Interchangeable
interchangeable cross-reference
interchangeable
1972239-1Interchangeable
interchangeable cross-reference
interchangeable
885B052944Interchangeable
interchangeable cross-reference
interchangeable
LRCX2K5Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10-22822-06?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10-22822-06?
10-22822-06 is a GASKET.
What parts can replace 10-22822-06?
There are 11 known substitutes for 10-22822-06: 53421, 11740, 807 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10-22822-06?
10-22822-06 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-212-2310. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10-22822-06

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026