PartsTable
Technical Data Sheet
Download PDF

10-226 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited
Ugreen · MRO · MRO_GENERAL
PRODUCT OVERVIEW

10-226: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include special_features: RADIATOR CAP, end_item_identification: 4320-01-617-7587, maximum_working_pressure: 15.0 POUNDS PER SQUARE INCH (PSI) LBS, system_for_which_designed: PRESSURIZED, part_name_assigned_by_controlling_agency: CAP, FILLER OPENING. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-013-8142, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 10-226
NSN: 5315-00-013-8142
NIINs: 000138142, 000607080, 002321923, 002328144, 004871608, 005133667, 006460959, 007244540, 007575373, 008189423, 008863605, 009673766, 010223641, 010856051, 011999126, 013796005, 014593251, 014730451, 015025820, 016750051
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 38018 — MANITOWOC ENGINEERING CO DIVISION OF THE MANITOWOC CO INC (USA)
SPECIFICATIONS
special_featuresRADIATOR CAP
end_item_identification4320-01-617-7587
maximum_working_pressure15.0 POUNDS PER SQUARE INCH (PSI) LBS
system_for_which_designedPRESSURIZED
part_name_assigned_by_controlling_agencyCAP, FILLER OPENING
NSN5315-00-013-8142
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10-226 · Ugreen ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.156 INCHES NOMINAL IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
UNDER HEAD LENGTH: 2.047 INCHES NOMINAL IN
•
PIN CHAMFER ANGLE: 15.0 DEGREES NOMINAL
•
FIRST HOLE DIAMETER: 0.1719 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 0.938 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD ALL MATERIAL RESPONSES OVERALL
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.156 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEONE END DRILLED
UNDER HEAD LENGTH2.047 INCHES NOMINAL IN
PIN CHAMFER ANGLE15.0 DEGREES NOMINAL
FIRST HOLE DIAMETER0.1719 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.938 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD ALL MATERIAL RESPONSES OVERALL
DIAMETER0.741 INCHES MINIMUM AND 0.746 INCHES MAXIMUM IN
HEAD STYLEFLAT
SUBSTITUTES & CROSS-REFERENCES 8
138142Reference document
Same NSN cross-reference
Reference document — Secondary reference
9141299Reference document
Same NSN cross-reference
Reference document — Secondary reference
R268Reference document
Same NSN cross-reference
Reference document — Secondary reference
2708-1-2-8AReference document
Same NSN cross-reference
Reference document — Secondary reference
7198-010Reference document
Same NSN cross-reference
Reference document — Secondary reference
BRF513Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 10-226?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10-226?
10-226 is a RESISTOR,VARIABLE,WIRE WOUND,NON manufactured by Ugreen. It is classified as a MRO (MRO_GENERAL).
What parts can replace 10-226?
There are 8 known substitutes for 10-226: 138142, 9141299, R268 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10-226?
10-226 is cataloged in the U.S. Government catalog under NSN 5315-00-013-8142. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10-226

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.