PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10-18183
10-18183 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The DRIER,AIR-GAS,DESICCANT is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-479-3493, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10-18183
NSN: 5305-00-479-3493
FSC: 5305
CAGE: 59501 — UNISON INDUSTRIES LLC (USA)
SPECIFICATIONS
general_characteristics_item_description9.000 IN. PORM 0.030 IN. O/A LG,3.130 IN. MAX DIA,SILICA GEL INDICATING TYPE,MIL-D-3716,TYPE IV,GRADE H,80.0 PSIG MAX PRESSURE,1 OBSERVATIONWINDOW,MOLECULAR SIEVE,TYPE 4AXW 1/16 DIA PELLETS IN
NSN5305-00-479-3493
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 10-18183 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW MATERIAL: STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303SE
•
HEAD HEIGHT: 0.118 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
•
HEAD DIAMETER: 0.311 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
THREAD CLASS: 3A A
•
THREAD DIRECTION: RIGHT-HAND
•
HEAD STYLE: FILLISTER
•
THREAD LENGTH: 0.500 INCHES MINIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
SCREW MATERIALSTEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303SE
HEAD HEIGHT0.118 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
HEAD DIAMETER0.311 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
THREAD CLASS3A A
THREAD DIRECTIONRIGHT-HAND
HEAD STYLEFILLISTER
THREAD LENGTH0.500 INCHES MINIMUM IN
THREAD SERIES DESIGNATORUNF
NOMINAL THREAD DIAMETER0.190 INCHES IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
44804Interchangeable
interchangeable cross-reference
interchangeable
10424462Interchangeable
interchangeable cross-reference
interchangeable
1940708Interchangeable
interchangeable cross-reference
interchangeable
13900Interchangeable
interchangeable cross-reference
interchangeable
58311-001-03Interchangeable
interchangeable cross-reference
interchangeable
FW0630Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10-18183?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10-18183?
10-18183 is a DRIER,AIR-GAS,DESICCANT.
What parts can replace 10-18183?
There are 9 known substitutes for 10-18183: 44804, 10424462, 1940708 and 6 more. Substitute compatibility should be verified for your specific system.
Is 10-18183 still available?
10-18183 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10-18183

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026