PartsTable
Technical Data Sheet
PartsTable / MRO / 10-1809
10-1809 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include depth: 5.000 INCHES NOMINAL IN, width: 6.000 INCHES NOMINAL IN, height: 8.000 INCHES NOMINAL IN, material: COPPER ALLOY BODY, bore_shape: STRAIGHT, bore_diameter: 0.8750 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-118-4474, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 10-1809
NSN: 3110-00-118-4474
FSC: 3110
CAGE: 60635 — ECKEL MFG CO (USA)
SPECIFICATIONS
depth5.000 INCHES NOMINAL IN
width6.000 INCHES NOMINAL IN
height8.000 INCHES NOMINAL IN
materialCOPPER ALLOY BODY
bore_shapeSTRAIGHT
bore_diameter0.8750 INCHES NOMINAL IN
overall_width0.5000 INCHES NOMINAL IN
seal_quantity2
load_directionRADIAL
surface_finishGROUND
connection_typeTHREADED EXTERNAL PIPE FIRST END
connection_stylePLAIN (PIPE) FIRST END
NSN3110-00-118-4474
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 10-1809 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
•
BORE SHAPE: STRAIGHT
•
MATERIAL: STEEL INNER RING
•
SURFACE FINISH: GROUND
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.5000 INCHES NOMINAL IN
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
BORE SHAPESTRAIGHT
MATERIALSTEEL INNER RING
SURFACE FINISHGROUND
STANDARD TOLERANCE DESIGNATIONABEC NO.1
LOAD DIRECTIONRADIAL
MATERIALSTEEL RETAINER
MATERIALSTEEL BALL
MATERIALRUBBER SYNTHETIC SEAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
10-1809Interchangeable
interchangeable cross-reference
interchangeable
3127Interchangeable
interchangeable cross-reference
interchangeable
3127G 1/4IN.Interchangeable
interchangeable cross-reference
interchangeable
4441085-000Interchangeable
interchangeable cross-reference
interchangeable
115X01419X8444Interchangeable
Same NIIN cross-reference
interchangeable
Z99R14XR1CJInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10-1809?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10-1809?
10-1809 is a BEARING,BALL,ANNULAR. It is classified as a MRO (MRO_GENERAL).
What parts can replace 10-1809?
There are 6 known substitutes for 10-1809: 10-1809, 3127, 3127G 1/4IN. and 3 more. Substitute compatibility should be verified for your specific system.
Is 10-1809 still available?
10-1809 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10-1809

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026