PartsTable
Technical Data Sheet
Download PDF

10-16741 — 10-16741

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

10-16741: 10-16741.

The 10-16741 is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY CONTACT, pin_width: 0.019 INCHES NOMINAL IN, pin_length: 1.318 INCHES MINIMUM AND 1.333 INCHES MAXIMUM IN, overall_length: 1.496 INCHES NOMINAL IN, mounting_method: RETAINING HOLE, overall_diameter: 0.062 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-415-2496, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 10-16741
NSN: 5330-00-415-2496
NIINs: 004152496, 011741768
FSC: 5330 — Packing and Gasket Materials
CAGE: 59501 — UNISON INDUSTRIES LLC (USA)
SPECIFICATIONS
materialALUMINUM ALLOY CONTACT
pin_width0.019 INCHES NOMINAL IN
pin_length1.318 INCHES MINIMUM AND 1.333 INCHES MAXIMUM IN
overall_length1.496 INCHES NOMINAL IN
mounting_methodRETAINING HOLE
overall_diameter0.062 INCHES MAXIMUM IN
style_designatorSOCKET INSERT CONTACT
surface_treatmentGOLD CONTACT
terminal_type_and_quantity1 PIN END OPPOSITE CONTACT
surface_treatment_document_and_classificationMIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE CONTACT
NSN5330-00-415-2496
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10-16741 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR METAL
•
OUTSIDE DIAMETER: 0.609 INCHES NOMINAL IN
•
APERTURE DIAMETER: 0.375 INCHES NOMINAL IN
•
MATERIAL: COPPER OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL SHAPE STYLERECTANGULAR METAL
OUTSIDE DIAMETER0.609 INCHES NOMINAL IN
APERTURE DIAMETER0.375 INCHES NOMINAL IN
MATERIALCOPPER OVERALL
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10-16741?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10-16741?
10-16741 is a 10-16741. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 10-16741?
10-16741 is cataloged in the U.S. Government catalog under NSN 5330-00-415-2496. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10-16741

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.