PartsTable
Technical Data Sheet
Download PDF

10-16500 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

10-16500: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include overall_length: 34.000 INCHES NOMINAL IN, thread_direction: RIGHT-HAND FIRST END, end_item_identification: AIRCRAFT. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-012-0368, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10-16500
NSN: 5310-00-012-0368
NIINs: 000120368, 015761949
FSC: 5310 — Nuts and Washers
CAGE: R1120 — SATAIR A/S (DNK)
SPECIFICATIONS
overall_length34.000 INCHES NOMINAL IN
thread_directionRIGHT-HAND FIRST END
end_item_identificationAIRCRAFT
NSN5310-00-012-0368
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10-16500 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OR QQ-Z-325,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNF
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.312 INCHES IN
•
NUT HEIGHT: 0.258 INCHES MINIMUM AND 0.273 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
•
NUT STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OR QQ-Z-325,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNF
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.312 INCHES IN
NUT HEIGHT0.258 INCHES MINIMUM AND 0.273 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
NUT STYLEHEXAGON
THREAD CLASS2B
THREAD QUANTITY PER INCH24
SUBSTITUTES & CROSS-REFERENCES 7
251286Reference document
Same NSN cross-reference
Reference document — Secondary reference
80013Reference document
Same NSN cross-reference
Reference document — Secondary reference
120368Reference document
Same NSN cross-reference
Reference document — Secondary reference
WT2213Reference document
Same NSN cross-reference
Reference document — Secondary reference
8X1376Reference document
Same NSN cross-reference
Reference document — Secondary reference
126902Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 10-16500?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10-16500?
10-16500 is a NUT,PLAIN,HEXAGON.
What parts can replace 10-16500?
There are 7 known substitutes for 10-16500: 251286, 80013, 120368 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10-16500?
10-16500 is cataloged in the U.S. Government catalog under NSN 5310-00-012-0368. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10-16500