PartsTable
Technical Data Sheet
PartsTable / MRO / 10-163
10-163 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAPACITOR,FIXED,PAPER DIELECTRIC. Key specifications include wheel: NOT PROVIDED, filter: INCLUDED, material: RUBBER SYNTHETIC OVERALL, dial_type: CIRCULAR, body_style: STRAIGHT THRU, body_width: 1.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-292-1632, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 10-163
NSN: 5330-00-292-1632
FSC: 5330
CAGE: 76680 — FEDERAL-MOGUL CORP CHASSIS PRODUCTS DIV (USA)
SPECIFICATIONS
wheelNOT PROVIDED
filterINCLUDED
materialRUBBER SYNTHETIC OVERALL
dial_typeCIRCULAR
body_styleSTRAIGHT THRU
body_width1.500 INCHES NOMINAL IN
case_styleSQUARE
scale_typeWEIGHING
seal_width0.625 INCHES NOMINAL IN
body_height1.250 INCHES NOMINAL IN
body_length3.156 INCHES NOMINAL IN
temp_rating-40.0 FAHRENHEIT MINIMUM AND 200.0 FAHRENHEIT MAXIMUM DEGF
NSN5330-00-292-1632
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10-163 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT DIAMETER: 1.250 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 2.004 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 2.000 INCHES NOMINAL IN
•
SEAL WIDTH: 0.625 INCHES NOMINAL IN
•
SURFACE TREATMENT: PLASTIC CASE
•
CASE STYLE: SQUARE
•
MATERIAL: WOOL SEALING ELEMENT A
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT DIAMETER1.250 INCHES NOMINAL IN
OUTSIDE DIAMETER2.004 INCHES NOMINAL IN
HOUSING BORE DIAMETER2.000 INCHES NOMINAL IN
SEAL WIDTH0.625 INCHES NOMINAL IN
SURFACE TREATMENTPLASTIC CASE
CASE STYLESQUARE
MATERIALWOOL SEALING ELEMENT A
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
SEALING ELEMENT STYLEVERTICAL-ANGULAR
MATERIALLEATHER SEALING ELEMENT B
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
57DX22AInterchangeable
interchangeable cross-reference
interchangeable
KAX00-0380Interchangeable
interchangeable cross-reference
interchangeable
482419Interchangeable
interchangeable cross-reference
interchangeable
5305CV2-001-3Interchangeable
interchangeable cross-reference
interchangeable
47056Interchangeable
interchangeable cross-reference
interchangeable
5219 AIR INSERTERInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10-163?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10-163?
10-163 is a CAPACITOR,FIXED,PAPER DIELECTRIC. It is classified as a MRO (MRO_GENERAL).
What parts can replace 10-163?
There are 23 known substitutes for 10-163: 57DX22A, KAX00-0380, 482419 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10-163?
10-163 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-292-1632. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10-163

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026