PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10-1303-00
10-1303-00 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, seal_width: 0.469 INCHES NOMINAL IN, construction: SOLID, housing_bore_diameter: 2.875 INCHES NOMINAL IN, accommodated_shaft_diameter: 1.750 INCHES NOMINAL IN, cross-sectional_shape_style: SINGLE LIP. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-853-4153, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10-1303-00
NSN: 5330-00-853-4153
FSC: 5330
CAGE: 64186 — NORTH AMERICAN MARINE JET, INC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
seal_width0.469 INCHES NOMINAL IN
constructionSOLID
housing_bore_diameter2.875 INCHES NOMINAL IN
accommodated_shaft_diameter1.750 INCHES NOMINAL IN
cross-sectional_shape_styleSINGLE LIP
NSN5330-00-853-4153
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10-1303-00 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOUSING BORE DIAMETER: 2.875 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT DIAMETER: 1.750 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
CROSS-SECTIONAL SHAPE STYLE: SINGLE LIP
•
CONSTRUCTION: SOLID
•
SEAL WIDTH: 0.469 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HOUSING BORE DIAMETER2.875 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER1.750 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
CROSS-SECTIONAL SHAPE STYLESINGLE LIP
CONSTRUCTIONSOLID
SEAL WIDTH0.469 INCHES NOMINAL IN
MATERIALSTEEL SPRING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
R4141FInterchangeable
interchangeable cross-reference
interchangeable
5940001139828Interchangeable
interchangeable cross-reference
interchangeable
AA5110-04Interchangeable
interchangeable cross-reference
interchangeable
1229D108Interchangeable
interchangeable cross-reference
interchangeable
305579Interchangeable
interchangeable cross-reference
interchangeable
9312-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10-1303-00?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10-1303-00?
10-1303-00 is a SEAL,PLAIN.
What parts can replace 10-1303-00?
There are 9 known substitutes for 10-1303-00: R4141F, 5940001139828, AA5110-04 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10-1303-00?
10-1303-00 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-853-4153. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10-1303-00

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026