PartsTable
Technical Data Sheet
Download PDF

10-111P1 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

10-111P1: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.225 INCHES NOMINAL IN, thread_length: 0.245 INCHES MAXIMUM IN, screw_material: STEEL CORROSION RESISTING, fastener_length: 0.312 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-008-2776, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10-111P1
NSN: 5305-00-008-2776
FSC: 5305 — Screws
CAGE: 61423 — KIDDE TECHNOLOGIES, INC DIV KIDDE AEROSPACE AND DEFENSE (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.225 INCHES NOMINAL IN
thread_length0.245 INCHES MAXIMUM IN
screw_materialSTEEL CORROSION RESISTING
fastener_length0.312 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES NOMINAL
internal_drive_styleSLOT
nominal_thread_diameter0.112 INCHES IN
thread_quantity_per_inch40
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5305-00-008-2776
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 10-111P1 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.312 INCHES NOMINAL IN
•
THREAD LENGTH: 0.245 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.112 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL CORROSION RESISTING
•
INTERNAL DRIVE STYLE: SLOT
•
COUNTERSINK ANGLE: 80.0 DEGREES NOMINAL
TECHNICAL CHARACTERISTICS
FASTENER LENGTH0.312 INCHES NOMINAL IN
THREAD LENGTH0.245 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.112 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL CORROSION RESISTING
INTERNAL DRIVE STYLESLOT
COUNTERSINK ANGLE80.0 DEGREES NOMINAL
THREAD CLASS2A A
THREAD QUANTITY PER INCH40
SUBSTITUTES & CROSS-REFERENCES 1
10-111-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 10-111P1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10-111P1?
10-111P1 is a SCREW,MACHINE.
What parts can replace 10-111P1?
There is 1 known substitute for 10-111P1: 10-111-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 10-111P1?
10-111P1 is cataloged in the U.S. Government catalog under NSN 5305-00-008-2776. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10-111P1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.