PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10-10844
10-10844 ✓ Verified by PartsTable
3M · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The CASE,TEST SET is a 3M industrial component. Key specifications include end_item_identification: AV8B SUPPORT EQUIPMENT. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-579-1596, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10-10844
NSN: 5310-00-579-1596
FSC: 5310
CAGE: R1120 — SATAIR A/S (DNK)
SPECIFICATIONS
end_item_identificationAV8B SUPPORT EQUIPMENT
NSN5310-00-579-1596
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10-10844 · 3M ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.200 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: FLAT INTERNAL TEETH
•
MATERIAL: STEEL COMP 1050 OR STEEL COMP 1551 OR STEEL COMP 1552 OR STEEL COMP 1053 OR STEEL COMP 1054 OR STEEL COMP 1055 OR STEEL COMP 1059 OR STEEL COMP 1060 OR STEEL COMP 1561 OR STEEL COMP 1064 OVERALL
•
TEST DATA DOCUMENT: 81348-FFW100 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
MATERIAL THICKNESS: 0.010 INCHES MINIMUM AND 0.015 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.089 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND A GRADE AND 1 STYLE AND 1 COMPOSITION
•
HARDNESS RATING: 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER0.200 INCHES MAXIMUM IN
STYLE DESIGNATORFLAT INTERNAL TEETH
MATERIALSTEEL COMP 1050 OR STEEL COMP 1551 OR STEEL COMP 1552 OR STEEL COMP 1053 OR STEEL COMP 1054 OR STEEL COMP 1055 OR STEEL COMP 1059 OR STEEL COMP 1060 OR STEEL COMP 1561 OR STEEL COMP 1064 OVERALL
TEST DATA DOCUMENT81348-FFW100 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
MATERIAL THICKNESS0.010 INCHES MINIMUM AND 0.015 INCHES MAXIMUM IN
HOLE DIAMETER0.089 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATA1 TYPE AND A GRADE AND 1 STYLE AND 1 COMPOSITION
HARDNESS RATING40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
1202-00Interchangeable
interchangeable cross-reference
interchangeable
613205Interchangeable
interchangeable cross-reference
interchangeable
104-3S2AInterchangeable
interchangeable cross-reference
interchangeable
B107.500 CAT 19 TY1CL1STAInterchangeable
interchangeable cross-reference
interchangeable
0100Interchangeable
interchangeable cross-reference
interchangeable
GGG-P-480 TY1CL1STASZ1-1-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10-10844?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10-10844?
10-10844 is a CASE,TEST SET manufactured by 3M.
What parts can replace 10-10844?
There are 19 known substitutes for 10-10844: 1202-00, 613205, 104-3S2A and 16 more. Substitute compatibility should be verified for your specific system.
Is 10-10844 still available?
10-10844 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10-10844

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026