PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10-101949-8
10-101949-8 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, hole_diameter: 0.130 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM IN, overall_length: 0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM IN, style_designator: NON-CIRCULAR, aperture_diameter: 0.500 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-262-9360, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10-101949-8
NSN: 5330-00-262-9360
FSC: 5330
CAGE: 77820 — AMPHENOL CORP DIV AMPHENOL AEROSPACE OPERATIONS (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
hole_diameter0.130 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM IN
overall_length0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM IN
style_designatorNON-CIRCULAR
aperture_diameter0.500 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
bolt_hole_quantity4
outside_corner_radius0.109 INCHES NOMINAL IN
cross-sectional_thickness0.016 INCHES MINIMUM AND 0.032 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
outside_edge_to_bolt_hole_center_distance_along_width0.109 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_length0.109 INCHES NOMINAL IN
NSN5330-00-262-9360
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10-101949-8 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE CORNER RADIUS: 0.099 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 0.584 INCHES MINIMUM AND 0.604 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
MATERIAL: RUBBER OVERALL
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH: 0.104 INCHES MINIMUM AND 0.114 INCHES MAXIMUM IN
•
CROSS-SECTIONAL THICKNESS: 0.016 INCHES MINIMUM AND 0.032 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.130 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE CORNER RADIUS0.099 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH0.584 INCHES MINIMUM AND 0.604 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
MATERIALRUBBER OVERALL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.104 INCHES MINIMUM AND 0.114 INCHES MAXIMUM IN
CROSS-SECTIONAL THICKNESS0.016 INCHES MINIMUM AND 0.032 INCHES MAXIMUM IN
OVERALL LENGTH0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM IN
HOLE DIAMETER0.130 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL WIDTH0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM IN
APERTURE DIAMETER0.500 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH0.584 INCHES MINIMUM AND 0.604 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
FWM0568Interchangeable
interchangeable cross-reference
interchangeable
05468Interchangeable
interchangeable cross-reference
interchangeable
174174Interchangeable
interchangeable cross-reference
interchangeable
11611471Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10-101949-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10-101949-8?
10-101949-8 is a GASKET.
What parts can replace 10-101949-8?
There are 4 known substitutes for 10-101949-8: FWM0568, 05468, 174174 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10-101949-8?
10-101949-8 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-262-9360. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10-101949-8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026