PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10-10-10C
10-10-10C ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER NATURAL OR RUBBER SYNTHETIC OVERALL, outside_diameter: 3.875 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 3.500 INCHES NOMINAL IN, fsc_application_data: BAROMETER,MERCURIAL ALTITUDE, cross-sectional_thickness: 0.004 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-580-1582, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10-10-10C
NSN: 5330-00-580-1582
FSC: 5330
CAGE: 95896 — HASS INSTRUMENT CORPORATION (USA)
SPECIFICATIONS
materialRUBBER NATURAL OR RUBBER SYNTHETIC OVERALL
outside_diameter3.875 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter3.500 INCHES NOMINAL IN
fsc_application_dataBAROMETER,MERCURIAL ALTITUDE
cross-sectional_thickness0.004 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-580-1582
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10-10-10C MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CIRCULAR
•
APERTURE DIAMETER: 3.500 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 3.875 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.004 INCHES NOMINAL IN
•
MATERIAL: RUBBER NATURAL OR RUBBER SYNTHETIC OVERALL
•
FSC APPLICATION DATA: BAROMETER,MERCURIAL ALTITUDE
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORCIRCULAR
APERTURE DIAMETER3.500 INCHES NOMINAL IN
OUTSIDE DIAMETER3.875 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.004 INCHES NOMINAL IN
MATERIALRUBBER NATURAL OR RUBBER SYNTHETIC OVERALL
FSC APPLICATION DATABAROMETER,MERCURIAL ALTITUDE
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
101010Interchangeable
interchangeable cross-reference
interchangeable
FFS92Interchangeable
interchangeable cross-reference
interchangeable
130943Interchangeable
interchangeable cross-reference
interchangeable
001-101010Interchangeable
interchangeable cross-reference
interchangeable
F4210606-6-6-6-120.00Interchangeable
interchangeable cross-reference
interchangeable
5800765-810010-000Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10-10-10C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10-10-10C?
10-10-10C is a GASKET.
What parts can replace 10-10-10C?
There are 9 known substitutes for 10-10-10C: 101010, FFS92, 130943 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10-10-10C?
10-10-10C is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-580-1582. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10-10-10C

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026