PartsTable
Technical Data Sheet
Download PDF

10-09984-02 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10-09984-02: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, hole_diameter: 0.120 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.250 INCHES NOMINAL IN, overall_length: 3.610 INCHES NOMINAL IN, special_features: PRESSURE SENSITIVE ADHESIVE MYLAR FILM BONDED TO ONE SIDE W/REMOVABLE BACKING, style_designator: NON-CIRCULAR. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-931-8129, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10-09984-02
NSN: 5330-00-931-8129
FSC: 5330 — Packing and Gasket Materials
CAGE: 24785 — VICKERS INC (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR OVERALL
hole_diameter0.120 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.250 INCHES NOMINAL IN
overall_length3.610 INCHES NOMINAL IN
special_featuresPRESSURE SENSITIVE ADHESIVE MYLAR FILM BONDED TO ONE SIDE W/REMOVABLE BACKING
style_designatorNON-CIRCULAR
bolt_hole_quantity2
cross-sectional_thickness0.060 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationASTM D1056 SCE43 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
bolt_hole_centerline_to_nearest_edge_distance0.625 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_length0.120 INCHES NOMINAL IN
NSN5330-00-931-8129
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10-09984-02 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.060 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D1056 SCE43 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE: 0.625 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 2
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.060 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
STYLE DESIGNATORNON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D1056 SCE43 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH3.610 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH1.250 INCHES NOMINAL IN
BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE0.625 INCHES NOMINAL IN
BOLT HOLE QUANTITY2
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH3.370 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SPECIAL FEATURESPRESSURE SENSITIVE ADHESIVE MYLAR FILM BONDED TO ONE SIDE W/REMOVABLE BACKING
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 10-09984-02?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10-09984-02?
10-09984-02 is a GASKET.
What is the NSN for 10-09984-02?
10-09984-02 is cataloged in the U.S. Government catalog under NSN 5330-00-931-8129. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10-09984-02

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.